Apple Lightning Adapter; Powering On The Reader - baiMobile 3000MP User Manual

Apple Lightning adapter

With the release of the iPhone 5, iPod Touch 5 and the iPad 4 and mini, Apple changed the
30 pin accessory interface to a new 9 pin Lightning interface. In order to use the baiMobile
Bluetooth adapter with one of these Apple models, the baiMobile Bluetooth adapter must be
inserted into the Apple Lightning adapter. BALP plans to introduce a Bluetooth adapter with
a Lightning connector later in 2013.

Powering on the Reader

The baiMobile 3000MP Reader does not have an On/Off switch or button. Your reader is
powered on by inserting your CAC into your reader. If your CAC is already inserted in your
reader, slide it out and then reinsert the card. You will notice the reader's Home Screen
displayed on the LED panel on the back of the reader.
Power On Screen 1 – displayed for about 1.7 seconds when reader is first powered on
Power On Screen 2 – displayed for about 1.7 seconds
11