Accepting A Bluetooth Connection - baiMobile 3000MP User Manual

Power On Screen 3 – Reader will accept a Bluetooth connection request from an
application on your iPhone™ without requiring the user to press the OK button for 5 minutes
Power On Screen 4 –Reader is now powered on and is "listening" for a Bluetooth
connection request from an application on your iPhone™.
button to accept a connection request. The reader will stay in this state for approximately 7
days (firmware version 2.02.00 and higher) or until the Smart Card is removed from the
Reader, whichever occurs first. If the reader receives a connection request from the iPhone,
you may be prompted to authorize the request by pressing and releasing the OK button on
the front of the reader.

Accepting a Bluetooth connection

NSA security requirements state that the user must accept (acknowledge) all Bluetooth
connection requests from his or her mobile device.
Examples:
 When a client application on the mobile device needs to establish a Bluetooth
connection to the reader to access information (certificates) residing on the Smart
Card
 When a client application on the mobile device requires that the user acknowledge an
action (digital signing) involving the Smart Card
In such cases, the reader will display a message prompt such as "Auth?" and the white LED
beneath the OK button will flash repeatedly until the OK button is pressed.
12
User must first press the OK