Table of Contents
Advertisement
Chapter 1: Getting Started
Chapter 1: Getting Started
Virtual Keys
The keys on the left side of the remote in the touchscreen area are used for setting up your remote control, programming your components, and
for operating the more advanced functions of your components. For example, changing video input channels on your TV. We'll refer to these keys as
"virtual keys" or touchscreen keys throughout this user's guide.
LCD Touchscreen Keypad
The LCD touchscreen keypad consists of 40 virtual keys for programming the remote and using your com po nents. The touchscreen area remains
blank when the remote is not in use; and only the time/date and indoor temperature are displayed. Press the touchscreen keypad to activate it. You
can also use the SETUP/SHIFT hard key.
When the touchscreen is activated, it dis plays the last active component mode (TV, VCR, DVD, etc.) screen. For example, if you were using the
remote in the TV mode the last time you used it, the TV mode screen would appear again. The remote remains in the last mode you used until you
press another component key.
Note: If the touchscreen is inactive for more than 10 sec onds, it turns off to conserve battery power. You can change the LCD On Time located in the
Setup menu.
6
Chapter 1
Hide quick links:
Advertisement
Table of Contents
