Learning New Keys - Acoustic Research ARR1540 User Manual

Chapter 2: Programming Chapter 2: Programming
Learn New
Keys
Select Mode
Learn sensor
18

Learning New Keys

DVD
TV
Your remote has the ability to learn and store commands from your original remote(s) under the
VCR SAT mode(s) of your choice. You can learn 400 keys total.
Codes from the Code Lists include basic functionality for each component the remote operates. Once
AUD DVR
you have programmed the remote to control your component, you can customize your remote to
AMP
include certain functions from your original remote(s) that the codes may not cover. This allows you to
AUD2 AUX
TV
transfer most functionality from existing remotes to your ARR1540 remote.
TUNER
AUX2
1. Gather all the remotes that you want to learn and have them all lined up on a fl at surface before
EXIT
AUDIO
going into the Learn New Keys mode.
2. Point the top of the fi rst remote at the bottom of the ARR1540 so the IR LED on that remote is
in line with the ARR1540's Learn sensor. The remotes should be positioned 2-3 inches apart.
Tip: If you want to learn from a universal remote, you must press the component key on that remote
to select the desired mode before proceeding with Learning. For example, pressing the VCR key on
your original universal remote will allow your ARR1540 to learn from that component mode.
4. Press and hold the SETUP/SHIFT key until Entering Setup Mode appears.
Tip: You can also use the CH+/– keys to scroll forward or backward through the Setup menus.
5. Press and release SETUP/SHIFT until Learn New Keys Select Mode appears, then press the
component key on the touchscreen for the set of keys you want to learn. Select Key appears.
6. Press the touchscreen key or hard key you want to learn to. Learning New Key... appears.
Chapter 2