Setting The Beep Tone; Setting The Remote To Control The Volume Of Your Component - Acoustic Research ARR1540 User Manual

Set Beep
Off > On
Volume
Punch-Thru
From?
Chapter 3

Setting the Beep Tone

Your remote beeps whenever a key is pressed to acknowledge the keypress. You can turn this feature
on or off. The default setting is On.
1. Press and hold the SETUP/SHIFT key until Entering Setup Mode appears.
2. Press and release SETUP/SHIFT until Go to More Options appears, then press the OK key.
OK
System Info Options? appears.
EXIT
Tip: You can also use the CH+/– keys to scroll forward or backward through the Setup menus.
3. Press and release SETUP/SHIFT until Set Beep appears, then use the arrow keys to turn the
beep on or off. Press OK to save the setting. Beep Setting Saved appears.
4. When fi nished, press EXIT twice. Then press OK to exit the Setup menu.

Setting the Remote to Control the Volume of your Component

DVD
This feature allows your remote to control the volume of a component (or punch-thru), regardless of
the mode. For example, you can adjust the volume while in DVD mode without having to fi rst press
VCR SAT
the TV key. The default is set to punch-thru to TV.
DVR
1. Press and hold the SETUP/SHIFT key until Entering Setup Mode appears.
OK AUX
2. Press and release SETUP/SHIFT until Go to More Options appears, then press the OK key.
VCR
System Info Options? appears.
AUX2
DVR
EXIT
Chapter 3: Features Chapter 3: Features
or C
31