Chapter 3: Features; Setting An Event Timer - Acoustic Research ARR1540 User Manual

Universal learning remote with lcd touchscreen and integrated atomic clock
Table of Contents

Advertisement

Chapter 3: Features

Chapter 3: Features
Chapter 3: Features
Setup an
1
2
3
Event Timer
4
5
6
Note: You must set the time and day before you
set an event timer (see page 26). Also, at least
one macro must be programmed to set an event
timer.
Tip: You can also use the CH+/– keys to scroll
forward or backward through the Setup menus.
28

Setting an Event Timer

The Event Timer lets you program your remote to turn a component (TV, VCR, AUDIO, etc.) on or off
at the preprogrammed time using a macro. For example, you can program your remote to control
audio equipment to turn music on, program your TV as a Sleep Timer to turn off at a certain time,
or program your VCR to turn on and record. Up to 6 timer events can be set. After setting up your
Event Timer, be sure to leave the remote pointed at the component(s) you have programmed it to
control. They will have to be in the remote's line-of-sight in order for this feature to work.
1. Press and hold the SETUP/SHIFT key until Entering Setup Mode appears.
EXIT
2. Press and release SETUP/SHIFT until Setup an Event Timer appears, then press the event timer
key on the touchscreen you want to set up. Pick Macro for Timer # (1, 2 etc.) appears.
3. Press the macro key on the touchscreen you want to add. Set Start Timer Hour appears.
4. Use the arrow keys to set the hour, and press OK. Set Start Timer Min appears.
5. Use the arrow keys to set the minutes, and press OK. Timer Frequency appears.
6. Use the arrow keys to set how often you want the event to happen (One Time, Every Day, and
Weekly). Then press OK.
If you choose One Time or Weekly, Day of Week? appears. Use the arrow keys to choose the
day of week, then press OK. Timer Setup Complete appears.
7. To set additional timers, select another timer and repeat steps 3-6.
8. When fi nished, press EXIT. Then press OK to exit the Setup menu. A "T " appears in the
information display, indicating a timer is set.
To cancel at any time, press EXIT. Timer Setup Canceled appears.
To overwrite a timer with a new event, choose the timer you want in step 2 above. Overwrite Timer #
(1, 2, etc) appears. Press OK to confi rm. Timer # Deleted appears.
Illustrations contained in this document are for representation only.
Chapter 3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents