Functional Description; Carton Contents - Delta ShopMaster TS200 Instruction Manual

10" motorized bench saw

Hide thumbs Also See for ShopMaster TS200:

Instruction manual (27 pages)

Table Of Contents

Table of Contents

Available languages

EXTENSION CORDS

Use proper extension cords. Make sure

your extension cord is in good condition and is a 3-wire

extension cord which has a 3-prong grounding type

plug and matching receptacle which will accept the

machine's plug. When using an extension cord, be sure

to use one heavy enough to carry the current of the

machine. An undersized cord will cause a drop in line

voltage, resulting in loss of power and overheating. Fig.

D-1 or D-2, shows the correct gauge to use depending

on the cord length. If in doubt, use the next heavier

gauge. The smaller the gauge number, the heavier the

cord.

FOREWORD

Delta ShopMaster Model TS200LS is a 10" Table Saw designed to give high quality performance with depth of cut

capacity up to 3" (76mm) at 90° and 2" (51mm) at 45° for clean cutting of standard stock sizes. Delta ShopMaster

Model TS200LS includes the saw with a 13 amp 120V motor, a metal stand, rip fence, miter gage, see-through blade

guard with splitter and anti-kickback fingers, a 10" carbide-tipped saw blade, table insert and blade wrenches. The

TS200 is the same saw without the stand.

NOTICE: THE PHOTO ON THE MANUAL COVER ILLUSTRATES THE

CURRENT PRODUCTION MODEL. ALL OTHER ILLUSTRATIONS CONTAINED

IN THE MANUAL ARE REPRESENTATIVE ONLY AND MAY NOT DEPICT THE

ACTUAL COLOR, LABELING OR ACCESSORIES AND ARE INTENDED TO

ILLUSTRATE TECHNIQUE ONLY.

MOTORIZED BENCH SAW PARTS

Fig. 1 illustrates the saw removed from the container.

Figs. 2 and Fig. 3 illustrate the loose items packed with

the saw. Fig. 4 illustrates the loose items packed for the

stand for model TS-200LS ONLY.