Transmitter Button Functions - Code Alarm CA 5051 Installation Manual

9 - Single / Double Pulse Start: Switches the remote start activation between
a single or double press from the transmitter.
10 - IGN 2 Output: Programmable high current output.
Ignition 2 - Ignition output during remote start.
Accessory - Accessory output during remote start.
Start / Crank - Crank output during remote start.
11 - 2 or 3 Hour Start: When activated, the remote start will activate and run for
the programmed time and shut down every 2 or 3 hours.

Transmitter Button Functions

1 Way
Transmitter
Lock
Unlock
Trunk
Car Finder
Panic
Remote Start
Remote Start
Shut Down
Run Time
Extention
2 / 3 Hour Start
Daily Start Timer
2010 Audiovox Electronics Corporation. All rights reserved.
Car Find /
Lock Unlock
X
X
X
X
Start Operation Method
Panic
Press and Release
Press and Release
Push and Hold (3 Sec)
X Press and Release
X Push and Hold (3 Sec)
Press and Release (1 or 2 times
X
depending on selectable option)
X Push and Hold (3 Sec)
X Press and Release 4 times.
Ignition ON/OFF, Press and Hold
X
Valet Button, Press Start 4 times
X Press Lock + Start
21