Troubleshooting/Technical Specification
10. Troubleshooting
PROBLEM: Vacuum cleaner won't run
Cause: Power cord not firmly pushed into mains socket.
Solution: Plug cord in firmly to power outlet.
Cause: Blown fuse or tripped circuit breaker.
Solution: Check fuse/breaker. Replace fuse or reset breaker.
Cause: Thermal cut out operates.
Solution: Switch off vacuum cleaner and unplug from mains socket. Leave vacuum cleaner for at least 1 hour and
clean filters and change dust bag in the meantime.
PROBLEM: Vacuum cleaner won't pick up/loss of suction/loss of blow operation
Cause: Nozzle/dirt passage clogged.
Solution: Remove obstruction.
Cause: Filters are clogged.
Solution: Replace filters.
Cause: Accessories not attached correctly.
Solution: Check the accessories are firmly connected.
Cause: Combination floor tool in wrong position
Solution: Check the rocker is in the correct position for carpets or hard floors.
PROBLEM: Dust escaping from vacuum cleaner
Cause: Dust container full.
Solution: Empty the dust container.
11. Technical Specification
Power supply:
Motor power:
Dust container:
Dust container volume:
Filter system:
Cord length:
Weight:
Subject to technical change without notice.
10
220-240V/50Hz
900W (max)
Bagless
1 litre
Permanent filter
Air outlet filter
6 metres
2.5kg