Table of Contents
Advertisement
Vax VXL 401 User Guide.qxd:VZL-401 User Guide
www.vax.co.uk
Pivot lower housing and remove clog (Fig.8/4).
Fig.8/4
To reassemble, be sure tabs are engaged. Pivot the lower
housing closed (Fig.8/5).
Fig.8/5
Rotate locking ring back round to secure.
10
general maintenance / troubleshooting
All manuals and user guides at all-guides.com
13/6/07
18:01
Page 10
9. Troubleshooting
WARNING: To reduce risk of personal injury,
!
unplug vacuum cleaner before servicing.
PROBLEM: Cleaner won't run
Cause:
Not properly plugged into wall outlet.
Solution:
Plug in firmly.
Cause:
No electricity in wall outlet.
Solution:
Check fuse or breaker.
Cause:
On/off switch not turned on.
Solution:
Push on/off switch to on.
Cause:
Motor thermostat tripped.
Solution:
Switch off and unplug the vacuum cleaner.
Leave for one (1) hour. See page 3.
Cause:
Blown fuse/tripped breaker.
Solution:
Reset circuit breaker or replace fuse.
PROBLEM: Cleaner won't pick up
Cause:
Full or clogged dirt container.
Solution:
Clean dirt container.
Cause:
Clogged nozzle.
Solution:
Remove obstruction.
Cause:
Clogged dirt inlet.
Solution:
Remove suction channel cover and remove
obstruction.
Cause:
Clogged hose.
Solution:
Remove obstruction.
Cause:
Hose not inserted fully.
Solution:
Push hose in securely.
Cause:
Dirty filters or filter container.
Solution:
Clean/change filters or filter container.
PROBLEM: Accessories won't pick up
Cause:
Accessories not attached correctly.
Solution:
Refer to page 5 for fitting information.
PROBLEM: Brushbar does not turn
Cause:
Brushbar blocked.
Solution:
Remove blockages.
PROBLEM: Air flow restricted with attachment use
Cause:
Attachment use restricts air flow.
Solution:
Check attachment.
Cause:
New carpet debris clogging air path.
Solution:
Remove obstruction.
Advertisement
Table of Contents
