Table of Contents
Advertisement
Vax VCU-02 User Guide.qxd
6. Belt or Brush Bar:
Removal & Replacement
Tool required: Phillips Screwdriver
WARNING: To reduce the risk of injury from moving
!
parts - uplug before servicing.
TAB
Fig.6/1
To Remove New Belt
Turn cleaner over. Base should lay flat and face up. To
remove nozzle guard, remove two (2) screws near rollers
(Fig.6/1).
Fig.6/2
Release the nozzle guard by pulling tab toward the front of
the cleaner and rotate/pivot the nozzle guard up to lift off
(Fig.6/2).
6/3/07
13:58
Page 7
Fig.6/3
Be sure belt is off motor shaft. Lift and remove brush bar.
Dispose of old belt (Fig.6/3).
belt & brush bar removal & replacement
user guide
7
Advertisement
Table of Contents
