How To Operate - Vax VCU-02 Instruction Manual

Vax VCU-02 User Guide.qxd

4. How to Operate

!
WARNING: Fully assemble before operating.
Fig.4/1
Plug the extension cord firmly into the cord extension
connector making sure that both ends are completely
engaged.
NOTE: Use only a 3-core 1.0mm
with this cleaner. Using a cord of different type may result in
increased risk of fire or electric shock.
Fig.4/2
To prevent the cords from coming apart while vacuuming,
create a loophole with the extension cord and slide through
opening at top of cord lock (Fig.4/2). Allow loophole to slip
over hook at bottom of cord lock then remove excess slack
by pulling the long end of the extension cord (Fig.4/3).
6/3/07 13:58 Page 5
2
H05VV-F extension cord
Fig.4/3
Plug extension cord into electrical outlet. Turn power switch
to the "ON" position.
Fig.4/4
Tilt the cleaner back before you start vacuuming. At the same
time, use your foot to press the base down onto the carpet.
Fig.4/5
For tidy cord storage, wrap cord around upper and lower cord
wraps on back of cleaner.
Fig.4/6
use and function / operation
user guide
5