How To Assemble - Vax VCU-02 Instruction Manual

Vax VCU-02 User Guide.qxd
Vax VCU-02

3. How to Assemble

NOTE: To ensure proper operation of the cleaner, verify
!
that the rubber O-ring is in place and tighten all collars.
To attach the lower handle, align with nozzle opening in the
base of the cleaner (Fig.3/1). Push together firmly and turn
the knob clockwise to tighten (Fig.3/2).
Fig.3/1
To attach the bag, hold the handle and firmly push into lower
handle (Fig.3/3). Turn the top knob counterclockwise to
tighten and snap bag clip onto lower handle (Fig.3/4).
Fig.3/3
4
initial set up
6/3/07 13:58 Page 4
Fig.3/2
Fig.3/4
To attach the upper handle, align with middle section of
cleaner and push firmly into place (Fig.3/5). Turn the knob
clockwise to tighten (Fig.3/6).
Fig.3/5
To keep the cord out of the way while vacuuming, snap it
into the cord clip on the back of the upper handle (Fig.3/7).
Fig.3/7
Fig.3/6