Washing Dishes - Haier HDW12-SFE1 Series Operation Manual

Washing dishes

Programme selection
The most appropriate programme can be identified by comparing the type of crockery, cutlery, etc., as
well as the amount and condition of food remains, with the details contained in the wash cycle table.The
corresponding programme sequence, duration and consumption details are shown in the right half of the
overview. For example:
"
Use the Normal"
hard.
Earn savings
If only a small number of dishes have been loaded into the dishwasher,selecting a programme that
operates at the next lowest temperature which should be sufficient.
Programme data
The stated programme data are based on standard operating conditions. The values can vary
considerably according to:
different amounts of dishes
temperature of mains water supply
pressure of mains water supply
ambient temperature
fluctuations in mains voltage
machine-related factors (e.g. temperature, water volume,...)
Switching the dishwasher ON
Load the appliance and turn on the tap.
Close the door, and set On-Off button "A".
Press the programme button "C" to select the programme you
wish, and the corresponding programme indicator "B" light.
End of programme
Six beeps will indicate that the wash cycle has finished, the programme indicator light.
programme for dishes and utensils which have plenty of food remains stuck on
A
B
C
en
13