Radio modem RE400 1. Radio modem RE400 RE400 is a transparent radio modem for wireless data transfer with a modern, digital solution of the radio part (Software Defined Radio). It provides a wide tuning range including software-configurable channel spacing. It is equipped with Ethernet and RS232 interfaces, Powered over Ethernet (PoE) or via pins on a serial interface connector.
Page 9
One RE400 is connected to a LAN1 segment, the second RE400 to a LAN2 segment. IP addresses of both RE400 are not important for data transfer itself. They are used only for service purposes (setting up parameters). It is FORBIDDEN, however, to set the IP address of any radio modem to the same value of any equipment in either LAN1 or LAN2 segments.
The distance between the persons and antenna minimal 5 m comply with applicable standards for human exposure of general public to RF electromagnetic fields, namely with standard EN 50385: 2002. It is valid for all power levels and all antenna types which firm Racom provides.
, which were specially designed for supplying of radio modems. MS2000 and MSU120 can provide seamless switching to a backup battery while monitoring its state and charging it in an optimum way. When using PoE, we can also recommend a RACOM PoE power supply which includes battery backup option.
7.1. Important Warning RACOM s. r. o. (hereinafter referred to as RACOM) is the exclusive owner of all rights to this operator manual. All rights reserved. Any duplication of this manual in any way, shape or form, or translation to any other language (without the prior written consent of the owner of the rights) is strictly forbidden.
Nove Mesto na Morave, 25 of July 2008 Jiri Hruska, CEO RACOM s.r.o. • Mirova 1283 • 592 31 Nove Mesto na Morave • Czech Republic www.racom.eu Tel.: +420 565 659 511 • Fax: +420 565 659 512 • E-mail: racom@racom.eu Fig.
7.4. Limitations of Use The RE400 radio modem has been developed for the frequency range 370 to 470 MHz. Specific fre- quencies are used for each country or region. A radio modem user must keep in mind that this radio device cannot be operated without the permission of the respective local radio spectrum administrator who provides a specific frequency for use and issues the appropriate permission for this.
2008-03-26 First edition Revision 1.5 2008-04-18 First start of radio modem — prevent start of two RE400 in default state together, they both use IP address 192.168.1.2 Revision 1.6 2008-04-22 Table of Technical Parameters — output power, data rate, power consumption.