Assembly - Cap Strength FM-H1007A125 Owner's Manual

7. ASSEMBLY

Step 1:
Connect the base frame (3) to the horizontal beam (6)
by using bolts (32&34), washers (47), enforcement (25)
and locknuts (43)
Step 2:
Connect the front stabilizer bar (4) to front stabilizer (9)
and front treadle (17) by using bolts (41), washers (47),
and locknuts (43)
Step 3:
Connect base frame assembly(3) to front stabilizer bar
assembly (4) and seat support (7) by using bolts (34&35),
washers (47), and locknuts (43)
Step 4:
Slide bottom guide rods (11) into the rubber bumpers (74)
and through the horizontal beam (6) fasten by using bolts (38)
and washers (47). Insert top guide rods (10) into bottom guide
rods (11). (Note: It is optional to postpone inserting the top
guide rods into the bottom guide rods until after step 5 to make
installation of the weight stacks easier).
9