Cap Strength FM-H1007A125 Owner's Manual page 12

Step 13:
Attach the seat rest (24) to the seat support (7) by using
screws (40).
Step 14:
Insert foam roller tubes (20) into the base frame (3) and leg
extension (8). hen slide foam rolls (21) onto the foam roller
tubes (20).
Step 15:
Stick bolt (37) through the curved/bent part of the left
arm (14) then place washers (47), nut (44), pec deck
cable (65) around the bolt (37) and tighten with locknut (43).
(Note: pec deck cable has a metal ring on each end)
Step 16:
Place the pec deck cable (65) within the grooves of the pulley
wheel (61). Then align the pulley wheel (61) between the
teeth of the pulley bracket C (28). Align left safeguard cover (29)
with the pulley wheel (61) and pulley bracket C (28) and secure
by using bolt (36), washers (47) and locknut (43).
12