Part Identification Chart - Cap Strength FM-H1007A125 Owner's Manual

4. PART IDENTIFICATION CHART

Assembly requires two persons. Place all parts in a cleared area and remove the packing materials. Do not dispose
of the packing materials until assembly is completed. See below a list of tools that are included with your product. In
addition to the included tools, assembly may require a Phillips screwdriver, an adjustable wrench, and a
rubber mallet (not included). See the drawings below to identify the small parts needed for assembly. Note: If a
part is not in the hardware kit, check to see if it has been preassembled. To avoid damaging parts, do not
use power tools for assembly.
Not included
5