Log Placement 400/500 Series - MHSC KHLDV400 Installation And Operating Instructions Manual

KHLDV Series Gas Fireplace
LoG pLaceMent - 400/500 SerIeS
Burner Grate Assembly
1. Place the rear log over the grate toward the back by positioning the holes over the large pins located
LG593
at the right and left. When the log is in place, the back surface of the log will come in contact with
KHLDV grate
the light trapezoid deflector.
Step 2
LG595
3. Place the left front log in place by setting it over the left
side of the rear log (match protrusion to indentation), the KHLDV right front log
hearth brick and over the left tong on the grate. Match
the notch at the bottom of the branch with the tong on
the grate.
48
LG593
2. Place the log over the pilot by holding the log with the wide
end toward the back and the branch toward the front and
left. Set the log by having the protrusion on the bottom of
the log rest to the left side of the grate bar and behind the
pilot shield. Also set the notch located at the bottom of the
left branch over the second right tong on the grate. Make
sure that the log is positioned properly so it is not rocking.
note: when the log is in place, it should not touch
the pilot but will be resting over the pilot shield.
LG595
LoG pLaceMent
Step 1
LG594
KHLDV rear log
Step 3
LG596
KHLDV left front log
LG594
LG596
73D0024