Table of Contents
Advertisement
LOGS and ROCK WOOL INSTALLATION
1. Distribute one layer of rock wool to cover all round burner ports. Do not cover rectangular slots,
located in front and rear. Figure 64
. Place log #1 by setting the log over the rear bracket over the two pins. Figure 65
NOTE: Placing rock wool on burner provides glowing
embers. For best results, pull the rock wool apart into
pieces the size of a dime or smaller.
75D0004
Figure 64 -
Rock Wool Placement on Burner.
FP1983
MLDV rock wool place
Figure 65 -
Install log #1
LG543
MLDV log #1
MLDV Series Gas Fireplace
FP1983
Log #1
Do not use the entire bag of rock wool
to cover the burner. This could cause
the flame to burn poorly and may lead to
sooting.
LG543
49
Advertisement
Table of Contents
