CONTACT
If you have technical problems, contact your installer. The following information is required in
order to provide you with the necessary assistance:
• Inverter device type
• Inverter serial number
• Type and number of PV modules connected
• Event number or display message on the inverter
• Optional equipment (e.g. communication products)
SMA Solar Technology Ag
Sonnenallee 1
34266 Niestetal, Germany
www.SMA.de
SMA Service Line
Inverters:
+49 561 9522 1499
Communication:
+49 561 9522 2499
Fax:
+49 561 9522-4699
E-mail:
Serviceline@SMA.de
installer contact
ExPLANATiON Of SYMBOLS
Symbole am Wechselrichter
Operation display
An error has occurred. Inform your installer immediately.
There are special requirements for the grounding.
Symbole auf dem Typenschild
Beware of dangerous electrical voltage.
The inverter operates at high voltages. Any work on the inverter must be carried
out by electrically qualified persons only.
Beware of hot surface.
The inverter can become hot during operation. Avoid contact during operation.
Observe enclosed documentation.
The inverter must not be disposed of together with the household waste.
Further disposal information can be found in the enclosed installation manual.
CE mark. The inverter complies with the requirements of the applicable EC
guidelines.
Device class label The inverter is equipped with a wireless component that
complies with the harmonized standards.
Certified safety The inverter complies with the requirements of the Europe
Equipment and Product Safety Act.
RAL quality mark for solar products The inverter complies with the requirements of
the German Institute for Quality Assurance and Labeling.
In compliance with Australian mark
Direct current (DC)
Alternating current (AC)
The inverter is protected against penetration by dust particles and water jets from
any angle.
The inverter is transformerless.
* The Bluetooth
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any
®
use of these marks by SMA Solar Technology AG is under license.
ViSUAL iNSPECTiON, MAiNTENANCE AND CLEANiNg
Bluetooth
. Bluetooth
®
communication active.*
gLOSSArY
PV Inverters
SUNNY BOY 3000TL/4000TL/5000TL
User manual
SB30_50TL_21-BA-BEN113410 | IMEN-SBXTL-21 | Version 1.0
Visual inspection
Check the inverter and cables for any signs of external damage. Contact your installer if you find any
damage. Do not perform any repair work yourself.
Maintenance and Cleaning
Ask your installer to check for correct inverter operation at regular intervals.
If the display field or the LEDs are dirty and you find it difficult to read the operating data and
operating states of the inverter, clean the display and the LEDs with a damp cloth. Do not use any
corrosive substances (e.g. solvents, abrasives) for cleaning.
AC
Abbreviation for "alternating current".
Bluetooth
Bluetooth is a radio technology that allows the inverter and other communication devices to
communicate with each other. Bluetooth communication does not require visual contact between the
devices.
DC
Abbreviation for "direct current".
Electronic Solar Switch (ESS)
The Electronic Solar Switch is part of the inverter DC disconnection unit. Electronic Solar Switch must
be securely inserted into the bottom of the inverter and must
only be removed by electrically qualified persons.
PV
Abbreviation for photovoltaics.
EN
Need help?
Do you have a question about the Sunnu Boy 3000TL and is the answer not in the manual?
Questions and answers