Attach The Front Wheel - InStep 11-AR108 Owner's Manual

ATTACH THE FRONT WHEEL

WARNING!
If the front wheel is not securely locked in place it may
fall off the jogging stroller and cause serious injury or
death. Always check the front wheel is securely locked in
place before use.
❶ Position the stroller so the handle rests on the ground, with
the front fork facing up. Figure 3.4
❷ Move the quick release lever into the open position.
❸ Set wheel into the forks, ensure the axle is properly seated,
and hand tighten the cone nut.
❹ Close the quick release lever to the fully closed locked
position. When closing the lever it should leave an imprint
on your hand. The lever should have firm but not
excessive pressure when closing.
❺ Pull on the wheel to ensure it is locked in place. If necessary
loosen the quick release lever and re-tighten the cone nut.
Re-check the wheel to be sure it is locked into place.
7
4
2
3
1
Figure 3.4