General information
● When you disconnect the power cord of any accessory or enhancement,
grasp and pull the plug, not the cord.
● Check regularly that enhancements installed in a vehicle are mounted
and are operating properly.
● Installation of any complex car enhancements must be made by qualified
personnel only.
Access codes
To set how your phone uses the access codes and security settings, select
Menu > Settings > Security.
● The PIN (UPIN) code, supplied with the SIM (USIM) card, helps to protect
the card against unauthorized use.
● The PIN2 (UPIN2) code, supplied with some SIM (USIM) cards, is required
to access certain services.
● PUK (UPUK) and PUK2 (UPUK2) codes may be supplied with the SIM (USIM)
card. If you enter the PIN code incorrectly three times in succession, you
are asked for the PUK code. If the codes are not supplied, contact your
service provider.
● The security code helps to protect your phone against unauthorized use.
You can create and change a code, and set the phone to request the code.
● The barring password is required when using the Call barring service
to restrict incoming calls to and outgoing calls from your phone (network
service).
● To view or change the security module settings, select Menu >
Settings > Security > Security module sett..
Configuration setting service
To use some of the network services, such as mobile internet services, MMS,
Nokia Xpress audio messaging, or remote internet server synchronization,
your phone needs the correct configuration settings. For more information
on availability, contact your service provider or the nearest authorized
Nokia dealer, or visit the support area on the Nokia website.
support", p. 9.
When you have received the settings as a configuration message and the
settings are not automatically saved and activated, Configuration
settings received is displayed.
To save the settings, select Show > Save. If required, enter the PIN code
supplied by the service provider.
8
See "Nokia
Need help?
Do you have a question about the 7310 Supernova and is the answer not in the manual?
Questions and answers