Packet Data; Usb Data Cable - Nokia 7310 Supernova User Manual

Settings
Enter a passcode (up to 16 characters) on your phone and allow the
connection on the other Bluetooth device.
If you are concerned about security, turn off the Bluetooth function, or set
My phone's visibility to Hidden. Accept Bluetooth communication only
from those you trust.
PC connection to the internet
Use Bluetooth to connect your compatible PC to the internet without PC
Suite software. Your phone must have activated a service provider that
supports internet access, and your PC has to support Bluetooth personal
area network (PAN). After connecting to the network access point (NAP)
service of the phone and pairing with your PC, your phone automatically
opens a packet data connection to the internet.

Packet data

General packet radio service (GPRS) is a network service that allows mobile
phones to send and receive data over an internet protocol (IP)-based
network.
To define how to use the service, select Menu > Settings >
Connectivity > Packet data > Packet data conn. and from the following
options:
● When needed — to set the packet data connection to established when
an application needs it. The connection will be closed when the
application is terminated.
● Always online — to automatically connect to a packet data network
when you switch the phone on
You can connect a compatible PC to the phone by Bluetooth or USB data
cable and use the phone as a modem. For details refer to Nokia PC Suite.
See "Nokia support", p. 9.

USB data cable

You can use the USB data cable to transfer data between the phone and a
compatible PC or a printer supporting PictBridge.
To activate the phone for data transfer or image printing, connect the data
cable and select the mode:
● PC Suite — to use the cable for PC Suite
● Printing & media — to use the phone with a PictBridge compatible
printer or with a compatible PC
● Data storage — to connect to a PC that does not have Nokia software
and use the phone as a data storage device
To change the USB mode, select Menu > Settings > Connectivity > USB
data cable and the desired USB mode.
38