Packet Data Connection; Packet Data Settings - Nokia 6233 User Manual

wireless access to data networks
such as the Internet.
Enhanced GPRS (EGPRS) is similar
to GPRS but enables faster
connections. For more information
on availability of EGPRS and data
transfer speed, contact your
network operator or service
provider.
The applications that may use
WCDMA or (E)GPRS are MMS,
video streaming, browsing
sessions, e-mail, remote SyncML,
Java application downloading, and
the PC dial-up.
When you have selected GPRS as a
data bearer, the phone uses EGPRS
instead of GPRS if this is available
in the network. You cannot select
between EGPRS and GPRS, but for
some applications you may be able
to select GPRS or GSM data
(circuit switched data, CSD).

Packet data connection

Select Menu > Settings
Connectivity > Packet data
Packet data connection, and from
the following options:
Always online to set the phone to
automatically register to a packet
data network when you switch on
the phone. or
the packet data service is
available.
If you receive a call or a text
message, or make a call during a
packet data connection,
indicates that the packet data
connection is suspended (on hold).
When needed
establish a packet data connection
when an application using packet
data needs it, and to close the
connection when you end the
application.

Packet data settings

You can connect the phone using
Bluetooth wireless technology,
infrared, or USB data cable
connection to a compatible PC and
use the phone as a modem to
enable packet data connectivity
from the PC.
To define the settings for the
packet data connections from your
PC, select Menu >
Connectivity
Packet data settings
access
>
access point you want to use.
>
Select
Alias for access
name to change the access point
settings, and select OK. Select
Packet data access
the access point name (APN) to
indicates that
establish a connection to a
network, and select OK.
Copyright © 2006 Nokia. All rights reserved.
S e t t i n g s
to register and
Settings
> Packet data
> Active
point, and activate the
Edit active access point
point, enter a
point, enter
or
>
>
>
55