Packet Data Connection; Packet Data Settings - Nokia 6234 User Manual

S e t t i n g s
The applications that may use WCDMA or (E)GPRS are MMS, video
streaming, browsing sessions, email, remote SyncML, Java application
downloading, and the PC dial-up.
When you have selected GPRS as a data bearer, the phone uses EGPRS
instead of GPRS if this is available in the network. You cannot select
between EGPRS and GPRS, but for some applications you may be able to
select GPRS or GSM data (circuit switched data, CSD).

Packet data connection

Select Menu > Settings > Connectivity > Packet data > Packet data
connection, and from the following options:
Always online to set the phone to automatically register to a packet
data network when you switch on the phone. or indicates that
the packet data service is available.
If you receive a call or a text message, or make a call during a packet
data connection, or indicates that the packet data connection is
suspended (on hold).
When needed to register and establish a packet data connection when
an application using packet data needs it, and to close the connection
when you end the application.

Packet data settings

You can connect the phone using Bluetooth wireless technology,
infrared, or USB data cable connection to a compatible PC and use the
phone as a modem to enable packet data connectivity from the PC.
To define the settings for the packet data connections from your PC,
select Menu > Settings > Connectivity > Packet data > Packet data
settings > Active access point, and activate the access point you want to
use. Select Edit active access point > Alias for access point, enter a name
to change the access point settings, and select OK. Select Packet data
access point, enter the access point name (APN) to establish a
connection to a network, and select OK.
You can also set the packet data service settings (access point name) on
your PC using the Nokia Modem Options software. See "Nokia PC Suite,"
Copyright © 2006 Nokia. All rights reserved. 95