Data Transfer Without Sim Card; Synchronize From A Compatible Pc; Synchronize From A Server; Usb Data Cable - Nokia 6233 User Manual

Data transfer without SIM
card
Your phone allows data transfer
when the SIM card is not inserted.
Switch on your phone with no SIM
card inserted, and select Transfer
and from the following options:
Send data — to select a contact,
other than Server synchronisation
and PC synchronisation, from the
partner list to transfer data from
your phone. The phone starts a
synchronization or copy session.
Receive data > Via Bluetooth
Via infrared — to receive data
from the other phone
Synchronize from a
compatible PC
Before you synchronize data from
calendar, notes, and contacts from
a compatible PC, you must install
the Nokia PC Suite software of
your phone on the PC. Use
Bluetooth wireless technology,
infrared, or a USB data cable for
the synchronization, and start the
synchronization from the PC.

Synchronize from a server

To use a remote Internet server,
you must subscribe to a
synchronization service. For more
information and the settings
required for this service, contact
your service provider. You may
receive the settings as a
configuration message. See
"Configuration settings service"
p. 11 and
If you have saved data on the
remote Internet server, to
synchronize your phone, start the
synchronization from your phone.
Select Menu >
Connectivity
Server synchronisation.
Depending on the settings, select
or
Initialising synchronisation
Initialising
If the contacts or calendar are full,
synchronizing for the first time or
after an interrupted
synchronization may take up to 30
minutes to complete.

USB data cable

You can use the USB data cable to
transfer data between the memory
card inserted in the phone and a
compatible PC or a printer
supporting PictBridge. You can
also use the USB data cable with
Nokia PC Suite.
To activate the memory card for
data transfer or picture printing,
connect the USB data cable; when
the phone displays
connected. Select
Copyright © 2006 Nokia. All rights reserved.
S e t t i n g s
"Configuration" p. 60.
Settings >
> Data transfer
copy.
USB data cable
mode., select
>
or
57