Switch The Device On; Charge The Battery - Nokia N95-1 Get Started

Switch the device on

1
Press and hold .
2
If the device asks for a (U)PIN code or
lock code, enter it, and press
factory setting for the lock code is
12345.
Your device has internal antennas.
Note: As with any radio transmitting
device, avoid touching an antenna
unnecessarily when the antenna is in use.
For example, avoid touching the cellular
antenna during a phone call. Contact with a transmitting or receiving
antenna affects the quality of the radio communication, may cause
the device to operate at a higher power level than otherwise needed,
and may reduce the battery life.
1
Cellular antenna
2
Bluetooth technology/
wireless LAN antenna
3
GPS receiver
. The

Charge the battery

1
Connect a compatible charger
to a wall outlet.
2
Connect the power cord to the
device. If the battery is
completely discharged, it may
take a while before the
charging indicator starts
scrolling.
3
When the battery is fully
charged, the charging indicator
stops scrolling. Disconnect the charger from the device, then
from the wall outlet.
7