Advantech SMB-2501 User Manual
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Motherboard
  5. SMB-2501
  6. User manual
Advantech SMB-2501 User Manual

Advantech SMB-2501 User Manual

P4
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User's Manual
SMB-2501
P4 motherboard

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SMB-2501 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Advantech SMB-2501

Summary of Contents for Advantech SMB-2501

  • Page 1 User’s Manual SMB-2501 P4 motherboard...
  • Page 2 Copyright Notice This document is copyrighted, 2002, by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied,...
  • Page 3 SiS is a registered trademark of Silicon Integrated Systems Corp. ITE is a trademark of ITE Corp. All other product names or trademarks are properties of their respective owners. Part No. 2002250100 Edition Printed in Taiwan July 2002 SMB-2501 User’s Manual...
  • Page 4 Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defective, it will be repaired or replaced at no charge during the warranty period. For out-of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight.
  • Page 5 1. Collect all the information about the problem encountered. For example, CPU speed, Advantech products used, other hardware and software used, etc. Note anything abnormal and list any on-screen messages you get when the problem occurs. 2. Call your dealer and describe the problem. Please have your manual, product, and any helpful information readily available.
  • Page 6 SMB-2501 User’s Manual (in Driver Bank CD) Warrant Card Technical Support and Sales Assistance If you have any technical questions about the SMB-2501 series products, please visit our support website at http://www.advantech.com.tw/support For more information about Advantech products and sales information, please visit: http://www.advantech.com.
  • Page 7 SMB-2501 User’s Manual...

  • Page 8: Table Of Contents

    3.1 Function Keys -------------------------------------- 34 3.2 Main Menu ----------------------------------------- 35 3.2.1 Standard CMOS Features ------------------- 36 3.2.2 Advanced BIOS Features ------------------- 41 3.2.3 Advanced Chipset Features ----------------- 45 3.2.4 Integrated Peripherals ----------------------- 46 3.2.5 Power Management Setup ------------------ 55 SMB-2501 User’s Manual...
  • Page 9 4.2 Install LAN Driver -------------------------------- 74 4.2.1 Driver Installation for Win98/ME --------- 74 4.2.2 Driver Installation for Win2K/XP --------- 76 4.2.3 Driver Installation for Linux --------------- 78 4.2.4 Driver Installation for FreeBSD 4.x ------ 4.2.5 Driver Installation for QNX R6.1 --------- 78 SMB-2501 User’s Manual...
  • Page 10 Appendix A Memory Approval List ---------------- 83 Appendix B ISA Add-on Card Approval List ----- 84 Appendix C Safety Instructions --------------------- 85 C.1 English --------------------------------------------- 85 C.2 German- Wichtige Sicherheishinweise -------- 87 Appendix D RS-400-SF Specification ------------- SMB-2501 User’s Manual...
  • Page 11 SMB-2501 User’s Manual...

  • Page 12: Chapter 1 Introduction

    Chapter 1 Introduction The SMB-2501 is an ATX size Pentium 4 motherboard designed for high-density Internet services, CT and industrial automation. The motherboard uses a high integrated core logic chipset, SIS650 chipset with a high performance host interface for Intel Pentium 4 processor, a...
  • Page 13 Video Accelerator and advanced hardware acceleration logic to deliver high quality DVD playback. The SMB-2501 motherboard owns 1 AGP 4X slot, 2 PCI slots, 4 ISA slots and 1 CNR slot for function expansion. It supports maximum 5 add-on cards for PCI slots and ISA slots.

  • Page 14: Hardware Specification

    2, 2.5, & 3 clocks Two Intel 82559ER LAN controllers 10/100Mbps data transfer rate per controller Support Boot from LAN Intel 82559ER pin-to-pin compatible with Intel 82559. It allows to mount Intel 82559 by request SMB-2501 User’s Manual...
  • Page 15 Stacked two USB ports One VGA port Stacked two serial ports Two RJ-45 LAN ports with LEDs Board Weight 0.85Kg Regulatory FCC Class A, CE * SMB-2501 can support PSB 400/533MHz when it upgrades to use SiS 651 chipset. SMB-2501 User’s Manual...

  • Page 16: Software Specification

    1.2 Software Specifications OS support: Windows 98/ME/XP/2000 RedHat Linux 6.x/7.x FreeBSD 4.x, QNX R6.1 * No support for Win NT Series SMB-2501 User’s Manual...

  • Page 17: Environmental Specification

    1.3 Environmental Specifications • Operating temperature: 0 ~ 50° C • Storage temperature: -40 ~ 75° C (-40 ~ 167° F) • Operating Humidity: 10 ~ 85% @ 40℃ • Storage Humidity: 5~95% SMB-2501 User’s Manual...

  • Page 18: Chapter 2 Board Installation

    Chapter 2 Board Installation 2.1 Board Layout SMB-2501 User’s Manual...

  • Page 19: I/O Ports

    2.2 I/O Ports SMB-2501 User’s Manual...

  • Page 20: Jumpers And Connectors

    POWER LED Vcc3 2 JP5-SUPER I/O BATTERY SUPPLY Function Remark POWER FROM BATTERY POWER FROM SB3V Close* Default: 2-3 close S1-Flash ROM Size Function Remark ROM Size is 2Mbit Close ROM Size is 4Mbit Default: 1-2 close SMB-2501 User’s Manual...
  • Page 21 JP8-RTC CMOS Jumper setting. Function Remark CMOS Clear RTC COMS Active Close Default: 2-3 close Fan Connectors: JP2, JP7, JP9, JP12, JP15, JP34, JP35 Function Ground TACK (Sensor) *JP 35 is used for CPU fan SMB-2501 User’s Manual...

  • Page 22: Safety Precautions

    As a safety precaution, use a grounding wrist strap at all times. Place all electronic components in a static-dissipative surface or static-shielded bag when they are not in the chassis. SMB-2501 User’s Manual...

  • Page 23: Installing Memory

    DDR266 SDRAMs. The un-buffered DDR266 DIMMs are available in capacities of 128, 256, 512 and 1024 MB. The sockets can be filled in any combination with DDR DIMMs of any size, giving SMB-2501 up to 3 GB of memory. SMB-2501 User’s Manual...

  • Page 24: Memory Installation Procedures

    DDR DIMM socket. To remove the memory module, just push both handles outward, and the memory module will be ejected by the mechanism in the socket. DDR DIMM (184pin) SMB-2501 User’s Manual...
  • Page 25 Press the socket retaining latches back out of the way Orient the DDR DIMM so that the edge connector sections correctly match the socket sections. Holding the DIMM to SMB-2501 User’s Manual...
  • Page 26 Press the DDR DIMM into the socket so that it seats firmly in place and the retaining latches rotate upwards and seat them selves in the notches on the side of the DDR DIMM. Repeat this operation for the rest of DIMMs you will install. SMB-2501 User’s Manual...

  • Page 27: Cache Memory

    ® ® cache memories. The cache size in the Intel Pentium processor is 512 or 256 KB, depending on the type of CPU. ® The cache size in the Intel Celeron processor is 128KB. SMB-2501 User’s Manual...

  • Page 28: Cpu Installation

    2.8 CPU Installation The SMB-2501 provides an mPGA 478 socket for an Intel ® Pentium 4/ Celeron Processor. The CPU on the board must ® have a fan or heat sink attached, to prevent overheating. Warning: Without a fan or heat sink, the CPU will overheat and cause damage to both the CPU and the motherboard.
  • Page 29 CPU correspond with the notches on the inside of the socket. Gently slide the CPU in. It should insert easily. If it does not insert easily, pull the lever up a little bit more. SMB-2501 User’s Manual...
  • Page 30 Note: To remove a CPU, pull the lever out to the side a little and raise it as far as it will go. Lift out the CPU. Paint the heat-spread glue on the CPU evenly. (It is recommended, but some CPU cooler fan comes with a thermal pad. SMB-2501 User’s Manual...
  • Page 31 After a CPU has been installed, you will need to install the proper cooling device for the CPU. Place CPU cooler fan to sit on the top of an installed CPU Make the hooker of fan portion hook the retention module SMB-2501 User’s Manual...
  • Page 32 Press the two levers down to fasten the fan. Each lever can be pressed down in only one direction. The levers have been pressed down already. Please connect the fan power cable to the 3-pin fan power connector, JP35, on the board. SMB-2501 User’s Manual...
  • Page 33 SMB-2501 User’s Manual...

  • Page 34: Chapter 3 Bios Setup

    BIOS settings, run the CMOS Setup Utility by pressing the “Del” key command during the POST. If you think the settings need to be refreshed, run the Setup Utility, choose the “Load Optimized Defaults“ option from the main menu, save and reboot. SMB-2501 User’s Manual...

  • Page 35: Function Keys

    ← or → Select the menu item to the left or the right PU/PD Modify the value or setting Modify the value or setting Select the menu item Enter Display the General Help screen from anywhere in the BIOS Setup Load Previous Values Load Optimized Defaults Save the setting SMB-2501 User’s Manual...

  • Page 36: Main Menu

    CMOS RAM is automatically backed up to the Flash ROM. This is particularly useful in industrial environments that may cause soft errors. Upon such an error occurring, BIOS will check the data, and automatically restore the original data for booting. SMB-2501 User’s Manual...

  • Page 37: Standard Cmos Features

    Date (mm:dd:yy): Set the system date. The format is month, day and year. Move to proper place by arrow keys in order to modify the values by Page Up/+ Key or Page Down/- Key. Time (hh:mm:ss): change internal clock. SMB-2501 User’s Manual...
  • Page 38 IDE Primary Master: Move the highlight to the “IDE Primary Master” and enter to get the following screen. IDE HDD Auto-Detection: To auto-detect the capacity, cylinder, head and sector of HDD IDE Primary Master: [Auto/Manual/None] SMB-2501 User’s Manual...
  • Page 39 IDE Primary Slave: [Auto/Manual/None] Access Mode: [Auto/Large/LBA/CHS] IDE Secondary Master: Choose the option then get the following three items. IDE HDD Auto-Detection: To auto-detect the capacity, cylinder, head and sector of HDD IDE Secondary Master: [Auto/Manual/None] Access Mode: [Auto/Large/LBA/CHS] SMB-2501 User’s Manual...
  • Page 40 IDE Secondary Slave: Choose the option then get the following three items. IDE HDD Auto-Detection: To auto-detect the capacity, cylinder, head and sector of HDD IDE Secondary Slave: [Auto/Manual/None] Access Mode: [Auto/Large/LBA/CHS] SMB-2501 User’s Manual...
  • Page 41 Drive A: Set the type of floppy drive installed by Page Up Key and Page Down Key. Halt On: Set system halt on when specified item occurs. The selection items are showed in the following screen. SMB-2501 User’s Manual...

  • Page 42: Advanced Bios Features

    CPU L1 & L2 Cache [Enabled/ Disabled] CPU L2 Cache ECC checking [Enabled/ Disabled] Quick Power On Self Test (POST) [Enabled/Disabled]: Allows the system to skip certain tests while booting. This will decrease the time needed to boot the system. SMB-2501 User’s Manual...
  • Page 43 40 or 80 tracks. A 360 KB type drive is 40 tracks; while 720 KB, 1.2 MB, and 1.44 MB type drives are all 80 tracks. Disable- BIOS will not search for the floppy drive type by track number. SMB-2501 User’s Manual...
  • Page 44 Security Option [System/Setup]: The setting determines whether the system will boot up if the password is denied. Access to Setup is, however, always limited. System- The system will not boot, and access to Setup will be denied if SMB-2501 User’s Manual...
  • Page 45 This gives you an opportunity to move data from a hard disk that is going to fail to a safe place before the hard disk becomes offline. Video BIOS Shadow [Enabled/ Disabled]: Enable copies video BIOS to shadow RAM for performance improving. SMB-2501 User’s Manual...

  • Page 46: Advanced Chipset Features

    DRAM Timing Control [By SPD/ Manual]: Set “By SPD” to enable DRAM Timing Control automatically to be determined by BIOS based on the configurations on the SPD (Series Presence Detect) EEPROM on the DRAM module. SMB-2501 User’s Manual...

  • Page 47: Integrated Peripherals

    3.2.4 Integrated Peripherals Choose the “Integrated Peripherals” option from main menu. SIS OnChip IDE Device: Move the highlight to the “SIS OnChip IDE Device” and enter to get the following screen. SMB-2501 User’s Manual...
  • Page 48 IDE devices can be supported. If user installed the Off-Board PCI IDE controller, the user must choose which channels to disable. This will depend on the channel used in the PCI Off-Board add-on card. Normally select “Both” SMB-2501 User’s Manual...
  • Page 49 IDE devices possible. Because each IDE device may have a different Mode timing (0, 1, 2, 3, 4), it is necessary for these to be independent. The default setting “Auto” will allow auto-detection to ensure optimal performance. SMB-2501 User’s Manual...
  • Page 50 IDE device may have a different Mode timing (0, 1, 2, 3, 4), it is necessary for these to be independent. The default setting “Auto” will allow auto-detection to ensure optimal performance. IDE Burst Mode [Enabled/Disabled]: SMB-2501 User’s Manual...
  • Page 51 On-Chip Secondary PCI IDE [Enabled/Disabled] IDE Secondary Master/Slave PIO [Auto/Mode0/Mode 1-4] IDE Secondary Master/Slave UDMA [Auto/Disabled] SMB-2501 User’s Manual...
  • Page 52 SIS-7012 AC97 AUDIO [Disabled/Enabled]: Default is set Disabled. SIS-7013 S/W Modem [Disabled/Enabled]: Please set Enable when system installs CNR Modem System Shares Memory Size [4/8/16/32/64MB]: The memory size you choose will be used by internal VGA as Video memory. SMB-2501 User’s Manual...
  • Page 53 Onboard Serial Port 2 [Auto/Disable/(3F8/IRQ4)/(2F8/IRQ3) The system has an On-board Super I/O chipset with 2 serial ports. The On-board serial ports can be selected as: Auto Disable 3F8/IRQ4 COM 1 uses IRQ4 2F8/IRQ3 COM 2 uses IRQ3 SMB-2501 User’s Manual...
  • Page 54 “ECP + EPP” allows normal speed operation in a two-way mode. ECP Mode Use DMA: In ECP Mode Use DMA, you can select DMA channel 1 or DMA channel 3. Leave this field based on the default setting. SMB-2501 User’s Manual...
  • Page 55 “Enabled” will allow the system to use USB keyboard without device driver. IDE HDD Block Mode [Enabled/Disabled]: Enabled allows the Block mode access for the IDE HDD Init Display First [PCI slot/ AGP] AGP Auto Calibration [Disabled/ Enabled] SMB-2501 User’s Manual...

  • Page 56: Power Management Setup

    3.2.5 Power Management Setup Choose the “Power Management Setup” option from main menu. ACPI function [Enabled/ Disabled] ACPI Suspend Type SMB-2501 User’s Manual...
  • Page 57 Power Management: Suspend Mode: Video Off Option: SMB-2501 User’s Manual...
  • Page 58 Video Off Method: Switch Function: MODEM Use IRQ: SMB-2501 User’s Manual...
  • Page 59 HDD Off After: Power Button Override: Power State Resume Control: SMB-2501 User’s Manual...
  • Page 60 PM Wake Up Events: SMB-2501 User’s Manual...

  • Page 61: Pnp/ Pci Configurations

    OS cannot boot. Resources Controlled by [Auto/Manual]: BIOS can automatically configure all the boot and plug & play compatible devices. If you choose “Auto”, you cannot select IRQ, DMA and memory base address fields, since BIOS automatically assigns them. SMB-2501 User’s Manual...
  • Page 62 IRQ-3/4/5/7/9/10/11/12/14/15 can be assigned PCI/ISA PnP or Legacy ISA. When resources are controlled manually, assign each system DMA channel a type, depending on the type of device using the DMA channel. DMA-0/1/3/5/6/7 can be assigned to PCI/ISA PnP or Legacy ISA SMB-2501 User’s Manual...
  • Page 63 VGA, such as graphics accelerators or MPEG Video Cards, may not show colors properly. The setting Enabled should correct this problem. Otherwise, leave this on the setup default setting of Disabled. Recommend set Disabled. ISA IO/Memory Control: SMB-2501 User’s Manual...

  • Page 64: Pc Health Status

    3.2.7 PC Health Status The system can monitor system voltage, CPU voltage, CPU temperature, system temperature, CPU fan speed and system fan speed. SMB-2501 User’s Manual...

  • Page 65: Frequency/Voltage Control

    CPU: DRAM Clock Ratio: This setting controls the ratio of CPU FSB Clock & DRAM Frequency to enable the CPU & DRAM to run at different frequency combinations. Please note that the setting options vary according to the CPU FSB Clock preset. SMB-2501 User’s Manual...

  • Page 66: Load Optimized Defaults

    The option allows you to load the optimized default values for each of the parameters on the Setup menus. When this option is pressed, a confirmation is requested. Select “Y” to load the optimized default values. Select “N” or press “Esc“ to discard the selection. SMB-2501 User’s Manual...

  • Page 67: Set Password

    If the CMOS is good or if this option has been used to change the default password, the user is asked for the password stored in the CMOS. The screen will display the following message: Confirm Password: Input the current password and press “Enter”. SMB-2501 User’s Manual...

  • Page 68: Save & Exit Setup

    CMOS RAM. The CMOS RAM is sustained by an on board backup battery and stays on even system is turned off. Once the option is selected, a confirmation is asked. Select “Y” to save changes and exit. SMB-2501 User’s Manual...

  • Page 69: Exit Without Saving

    The option should only be used if you do not want to save the changes you have made to the Setup program. If you have made changes to the fields, the system will ask for confirmation before existing. Select “Y” then the system will keep previous values. SMB-2501 User’s Manual...

  • Page 70: Chapter 4 Driver Installation

    Microsoft Windows 98/ME/2000/XP, Linux 7.x, Free BSD 4.x and QNX R6.1. In the driver bank CD disc, there are some options as below when running “Setup” or CD auto-run. The motherboard is used for SMB-2501, RS-100-SF and RS-400-SF. After click icon-“SMB-2501”...
  • Page 71 There are four selections on the screen above: 1) Install VGA driver 2) Install LAN driver 3) Install PCI to ISA Bridge driver 4) Manual SMB-2501 User’s Manual...

  • Page 72: Install Vga Driver

    Install all of components in this package, including VGA driver and utilities. - Compact Install driver only. - Custom Install components by your choice. It is recommended to choose “Typical”. 4.1.1.4 Restart your computer when the installation has completed. SMB-2501 User’s Manual...

  • Page 73: Driver Installation For Win2K/Xp

    Install all of components in this package, including VGA driver and utilities. - Compact Install driver only. - Custom Install components by your choice. It is recommended to choose “Typical”. 4.1.2.4 Restart your computer when the installation has completed. SMB-2501 User’s Manual...

  • Page 74: Driver Installation For Linux

    4.1.5 Driver Installation for QNX R6.1 QNX R6.1 system cannot correctly recognize SiS 650 compatible VGA controller but Standard VGA driver. It is not necessary to load or modify the VGA driver for the onboard VGA device. SMB-2501 User’s Manual...

  • Page 75: Install Lan Driver

    4.2.1.6 In the "Update Device Driver Wizard" window, select "Search for a better driver than the one your device is using now. (Recommended)" Then click on "Next". 4.2.1.7 In the “Update Device Driver Wizard" window, click on "Browse". SMB-2501 User’s Manual...
  • Page 76 4.2.1.9 Click “Next” to accept the updated driver for “Intel(R) GD82559ER Fast Ethernet Adapter”. Click “Next” to continue with LAN driver installation. 4.2.1.10 Follow the instructions on the screen. Click “Finish” to complete installation. 4.2.1.11 Restart the computer to finish LAN driver setup. SMB-2501 User’s Manual...

  • Page 77: Driver Installation For Win2K/Xp

    Then, navigate “F:\82559er” (where “F” should be substituted as your CD-ROM drive), and click “Next”. 4.2.2.7 Click “Next” to accept the updated driver for “Intel(R) GD82559ER Fast Ethernet Adapter”. Click “Next” to continue with LAN driver installation. SMB-2501 User’s Manual...
  • Page 78 4.2.2.8 Follow the instructions on the screen. Click “Finish” to complete installation. SMB-2501 User’s Manual...

  • Page 79: Driver Installation For Linux

    LAN device. 4.2.5 Driver Installation for QNX R6.1 QNX R6.1 system can correctly recognize Intel 82559ER Fast Ethernet controller. It is not necessary to load or modify the network driver for the onboard LAN device. SMB-2501 User’s Manual...

  • Page 80: Install Pci To Isa Bridge Driver

    4.3.1.6 In the "Update Device Driver Wizard" window, select "Search for a better driver than the one your device is using now. (Recommended)" Then click on "Next". 4.3.1.7 In the "Update Device Driver Wizard" window, click on "Browse" SMB-2501 User’s Manual...
  • Page 81 4.3.1.9 Click “Next” to accept the updated driver for “ITE 8888 PCI to ISA bridge”. Click “Next” to continue with driver installation. 4.3.1.10 Follow the instructions on the screen. Click “Finish” to complete installation. 4.3.1.11 Restart the computer to finish driver setup. SMB-2501 User’s Manual...

  • Page 82: Driver Installation For Win2K/Xp

    Then, navigate “F:\ITE8888” (where “F” should be substituted as your CD-drive), and click “Next”. 4.3.2.7 Click “Next” to accept the updated driver for “ITE 8888 PCI to ISA bridge”. Click “Next” to continue with driver installation. SMB-2501 User’s Manual...
  • Page 83 4.3.2.8 Follow the instructions on the screen. Click “Finish” to complete installation. SMB-2501 User’s Manual...

  • Page 84: Appendix A Memory Approval List

    Die Brand & Model Name Vendor Capacity SAMSUNG K4H560838D-TXB0 APACER 512 MB SAMSUNG K4H280838D-TCB3 APACER 256 MB SAMSUNG K4H280838D-TXB0 APACER 256 MB SAMSUNG K4H280838D-TCB3 APACER 128 MB SAMSUNG Transcend 512 MB K4H5600838D-TCB3 SAMSUNG Transcend 256 MB K4H5600838D-TCB3 SAMSUNG K4H280838D-TXB0 256 MB SMB-2501 User’s Manual...

  • Page 85: Appendix B Isa Add-On Card Approval List

    Appendix B ISA Add-on Card Approval List Industrial Card Supplier Interface PCL-746-B Advantech PCL-730 Advantech CL-104H MOXA CL-132 MOXA SMB-2501 User’s Manual...

  • Page 86: Appendix C Safety Instructions

    12. Never pour any liquid into an opening. This could cause fire or electrical shock. 13. Never open the equipment. For safety reasons, the equipment should be opened by qualified service personnel only. SMB-2501 User’s Manual...
  • Page 87 The sound pressure level at the operator’s position according to IEC 704-1; 1982 is equal to or less than 70dB(A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein. SMB-2501 User’s Manual...

  • Page 88: German- Wichtige Sicherheishinweise

    11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten Sie es vom Stromnetz trennen. Somit wird im Falle einer Überspannung eine Beschädigung vermieden. 12. Durch die Lüftungsöffnungen drüfen niemals Gegenstände oder Flü ssigkeiten in das Gerät gelangen. Dies könnte einen Brand bzw. SMB-2501 User’s Manual...
  • Page 89 Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000 beträgt 70dB(A) oder weiger. DISCLAIMER: This set of instructions is provided according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein. SMB-2501 User’s Manual...

  • Page 90: Appendix D Rs-400-Sf Specification

    3.5” HDD 1 swappable IDE HDD cartridge 2 fixed HDD bay 3.5” FDD 5.25” CD-ROM 1 (52X speed) I/O Interface Serial 2 (RS-232) Parallel 1 (Optional) PS/2 2 (mouse x1, keyboard x1) Cooling 2 (86 CFM, 37CFM) SMB-2501 User’s Manual...
  • Page 91 482 x 177 x 502 mm (W x H x D) (19” x 7” x 19.76”) Weight 20.5 kg (45.1 lb) Note: * ISA slot doesn’t support DMA mode ** CNR slot supports Modem only *** SIS651 supports PSB 400/533MHz SMB-2501 User’s Manual...

Table of Contents