Installation - Globe GEG16 Instruction Manual

UNPACKING
Unpack the griddle immediately after receipt. If the machine is found to be damaged, save the packaging material
and contact the carrier within fifteen (15) days of delivery. Immediately contact Globe or your local dealer of the
equipment. You have no recourse to damage after fifteen (15) days.
TO AVOID SERIOUS PERSONAL INJURY:
ALWAYS install equipment in a work area with adequate light and space.
•
ONLY operate on a solid, level, nonskid surface that is nonflammable and away from sinks and water hazards.
•
NEVER bypass, alter or modify this equipment in any way from its original condition. Doing so may create
•
hazards and will void warranty.
NEVER operate the griddle without all warnings attached to it.
•
PROPER GROUNDING
THIS MACHINE IS PROVIDED WITH A THREE-PRONG GROUNDING PLUG. THE OUTLET TO WHICH THIS
PLUG IS CONNECTED MUST BE PROPERLY GROUNDED. IF THE RECEPTACLE IS NOT THE PROPER
GROUNDING TYPE, CONTACT AN ELECTRICIAN. DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR
REMOVE THE THIRD GROUND PRONG FROM THE POWER CORD OR USE ANY ADAPTER PLUG (Fig. 6-1
and Fig. 6-2).
1. Complete the warranty card and mail it to Globe or register online at www.globeslicers.com/warranty.asp.
2. Griddle and outside covering/containment unit may become HOT after use. Use caution when touching
the unit.
This unit is 208/240V

INSTALLATION

NOTE: The GEG24, GEG36, & GEG48 are hard wire units only to be installed by a qualified electrician who is
familiar with electrical procedures and codes. Do NOT attempt to wire this unit with yourself.
1. Read this manual thoroughly before installation and operation. DO NOT proceed with installation and
operation if you have any questions or do not understand anything in this manual. Contact your local
representative or Globe first.
2. Remove the griddle from the box. Once your griddle has been removed from the packaging, be certain that all
protective plastics and residues are removed from all surfaces.
3. Select a location for the griddle that has a level, solid, nonskid surface that is nonflammable and away
from water hazards or sinks, and is in a well-lighted work area away from children and visitors.
Page 6
Installation
Fig. 6-1 Correct Fig. 6-2 Incorrect