Unpacking & Installation - Globe GG15G Instruction Manual

TO AVOID SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE:
• ALWAYS install equipment in a work area with adequate light and space.
• ONLY operate on a solid, level, nonskid surface that is nonflammable and away from sinks and water hazards.
• NEVER bypass, alter or modify this equipment in any way from its original condition. Doing so may create
hazards and will void warranty.
GAS and GAS PRESSURE
by a
Unit
The
These models are designed, built, and sold for commercial use only.
Instructions must be posted in a prominent location. All safety precautions must be taken in the event the user smells
gas. Safety information can be obtained from your local gas supplier.
UNPACKING
Unpack the Griddle immediately after receipt. Remove the gas Griddle from the crate; remove all packaging on and
surrounding the unit and be certain to remove all protective plastics and residues from all surfaces. Make sure that
all parts provided including the L.P. gas conversion kit are located.
If the machine is found to be damaged, save the packaging material and contact the carrier within fifteen (15) days
of delivery. Immediately contact Globe or your local dealer of the equipment. You have no recourse to damage
after fifteen (15) days.
Page 8
Unpacking & Installation
This unit is factory supplied in Natural Gas. This unit can be converted to L.P. gas
licensed and certified gas technician. Documentation may be necessary for warranty
issues. Failure to comply with this instruction, will void warranty.
See the included L.P. conversion kit for gas conversion parts and instructions.
installation must conform with the National Fuel Gas Code, ANSI Z223.1/NFPA 54, the
National Gas Installation Code, CSA-B149.1, or the Propane Installation Code,
CSA-B149.2 as applicable and in accordance with local codes.
appliance and it's individual shutoff valve (to be supplied by user) must be disconnected
from the gas supply piping system during any pressure testing of that system at test
pressures in excess of ½ psi (3.45 kPa).