Adjusting The Balance Or Phase - Meridian DSP33 User Manual

Adjusting the balance or phase

The balance control of the DSP33 Digital Loudspeaker System
uses digital signal processing to compensate for an off-centre
listening position by delaying and diminishing the sound in one
speaker, thus effectively shifting the speaker's image back.
To change the balance
Press < or > on the remote.
There are 20 settings in each direction.
To reset the balance to the centre
Press V on the remote.
Note: Because the use of the balance control processes the
digital signal, you may hear a slight clicking as the balance is
adjusted.
22
To change the phase
Press A on the remote.
The phase function controls the absolute phase of the digital
conversion. It can be used to compensate for signals that are
out of phase, giving an unnatural-sounding bass.