Mackie DL806 Quick Start Manual page 5

5. Fire Up the DL806 or DL1608
and Launch the Master Fader App:
Step five is the reward for following
the four previous steps. It's time to
turn on the mixer, but whispering
"sweet nothings" to it won't help.
Instead, you will need to press the
top edge of the Power switch to fire
it up [Figure A]. The Power LED will
illuminate green when engaged.
Now launch the Master Fader app
to get it started. Go ahead and tap
that app!
At this point, you will likely be
prompted to update the firmware.
Do so by following the on-screen
instructions before continuing.
Quick Start Guide
Five Simple Steps
After updating, the Mixer View
[Figure D] will be shown and at
this point you will want to verify
connectivity. This is easy to do,
as there are only two possibilities:
connected or offline.
Figure D – Mixer View: Connected
Figure E below shows an iPad
that is currently offline. In other
words, not connected to the mixer.
Figure E – Mixer View: Offline
So if your app looks like
Figure D, you are cool as
a cucumber, ready to rock...or
jazz...or country...or whatever else
it is that you do at times like these.
In the unusual instance that
"OFFLINE" is displayed, please
follow the directions again, step-
by-step, and also check out the
Troubleshooting section in the
Reference Guide.
If "OFFLINE" still remains, please
contact our splendid Technical
Support heroes. See page 31 for
contact information.
5