Mackie DL806 Quick Start Manual page 10

Introduction
The Master Fader app has
powerful features, but it is easy to
learn...and the more you use it, the
more intuitive it becomes.
As you work your way through
each of these sections, we urge you
to NOT just read this Quick Start
Guide and look at the images, but
instead, take each piece of newfound
knowledge and put it to use...PLAY
with it! Move faders, engage buttons,
change images and personalize
names, etc. This is software and
cannot be broken.
We'll start with the features of
the Mixer View as this is where you
will spend much of the time. The key
mixing controls of every input and
output of the mixer exist here.
You will also spend quite a bit
of time in the Channel View. The
Channel View is where plug-in
processing is adjusted on individual
channel inputs and outputs,
including EQ, dynamics and FX.
More on this later.
10
Overview
Navigation Bar
Mixer
View
We'll start in the Mixer View
discussing Channel Strips and the
Master Fader. Then we'll have even
more fun in Channel View territory
and finish off this tutorial with the
Navigation Bar that lies horizontally
across the top.
Channel Strips
1 – 8
Nine channels (including the
Master Fader) and the Navigation
Bar will always be displayed on
the Mixer View. In fact, the Master
Fader and Navigation Bar will
remain regardless of the selected
view, channel, effect, etc.
DL806 / DL1608
Master
Fader