Important Installation Notes - High Tech Pet Power Pet Installation & Operating Instructions Manual

INSTALLING YOUR POWER PET DOOR
This is the easy part. Install the POWER PET and Outside Frame as
shown below.
1. Cut Hole (wall installations
will require framing)
OUTSIDE
3. Install Outer Frame
Framing Tunnel
You may purchase our
optional WALL
ADAPTER TUNNEL
Or build your own

IMPORTANT INSTALLATION NOTES:

a) When installing the inside mounting screws, make sure they are
only moderately tight. Over tightening will cause your Power
Pet door housing to conform to any irregularities in the flat-
ness of your door or wall and will cause the door panel to slow,
stick or malfunction. Just tighten the screws until they stop. That
___________________________________________________________________________________________
8 www.hightechpet.com
2. Install Power Pet
door
Door
or
Wall
Inner Frame now comes pre-
attached to Power Pet door
High Tech Pet Products, Inc.
See installation notes
INSIDE