Samsung DS 5021D KEYSET General Description Manual page 7

1.2 SIZE AND CONFIGURATION
The OfficeServ 7100 is a modular and flexible platform. See figures 1-2 , 1-3 and 1-4.
The Main Cabinet has one (1) dedicated
processor slot for the MP10 (Main
Processor) and two (2) universal slots.
Each of the card slots provide 64 commu-
nication channels to support high density
modules. See figure 1-3
OfficeServ 7100 Capacities
When configuring a system to meet your requirements, select the appropriate number of interface cards listed in
Part 2 of this book to support the various types of switches, trunks, stations, voice mail and miscellaneous func-
tions. Combine both the physical ports of the main cabinet with the virtual ports in virtual cabinets 2 through 5
(see figure 1.6) to build a system as required. Your authorized Samsung Installation and Service Company has spe-
cial knowledge and training to do this.
The following table indicates the maximum number of each circuit type or device available in the OfficeServ
7100. The system architecture is designed to be extremely flexible so as to provide a myriad of configurations.
However it is impossible to accommodate all the maximum numbers into one system.
ITEM
Max # of Analog Trunk Ports
Max # of Digital Trunk Ports
PRI ONLY. (It does not support T1 trunk)
MAX # OF ANALOG + DIGITAL TRUNKS CANNOT EXCEED 24.
Max # of MGI Ports
Max # of Analog Sets
Max # of Digital Sets
MAX # OF STATION PORTS CANNOT EXCEED 32.
Max # of VM Ports
Max # of IP-UMS Ports
Max # of Virtual Ports Supported
Max # of H.323 Trunk Ports
Cabinet 1: 2 Universal Slots
MP10 U-Slot
(Slot 0) (Slot 1)
MAXIMUM #
20
23
24
24
24
4
N/A
96
24
1.3
Home Page
U-Slot
(Slot 2)
AVAILABLE HARDWARE
4TRM and/or 8TRK
TEPRIa = 23 (23B + D)
8 MGI Embedded (MP10) and/or MGI-16
4SLM, 8SLI and/or 16MWSLI
4DLM, 8DLI, 8COMBO and/or 16DLI
Embedded on the MP10
8 channels x 3 slots x 4 cabinets = 96
3 virtual slots x 8 ports = 24
Table of Contents
FIGURE 1-2
FIGURE 1-3
FIGURE 1-4