Table of Contents
Advertisement
Each Station can have a designated music source for playing to callers placed on Exclusive hold at that sta-
tion.
Each Trunk can have a designated music source for playing to callers placed on hold. This setting is overrid-
den by some of the other settings such as station music on hold, DID MOH and UCD MOH.
Each UCD group can have a designated music source to be played while a caller is in queue.
Each entry in the DID translation table can have a designated music source to be played when a caller to that
DID number is placed on hold.
MUSIC ON HOLD – SOURCES
The OfficeServ 7100 provides for up to five different types of Music on Hold source including silence or
"NONE" as listed below:
•
None: No audio is played to the listener
•
Tone: A tone or "beep" is repeated at a programmable interval
•
Chime: A music chime source located on the MP10 card is played to the listener.
•
External Source: An external source connected to a MP10 misc port card, such as a digital announcer or
radio, is played to the listener.
•
Voicemail Sound File: If the OfficeServ 7100 system has the embedded voicemail enabled, custom
recorded sound files from the Voice Mail card can be used for MOH sources. For more information on cre-
ating the sound files refer to Voice Mail Programming Manual. If you select this option be advised that
each VMMOH source requires a dedicated voicemail port.
NETWORKING
The OfficeServ 7100 system allows up to 5 systems using QSIG over PRI or 99 systems using SPNet over IP to
be networked together with a high level of feature integration. The networked systems may be any combi-
nation of OfficeServ 100, OfficeServ 500, OfficeServ 7200, and OfficeServ 7400 systems (OS 100, OS 500, and
OS 7200 running V.2.48 or higher and OS 7400 running V3.31 or higher software). The physical connection
between systems can be an IP network or proprietary PRI connection using Samsung's proprietary version of
QSIG, called SPNet. If PRI connection is used, the maximum number of nodes may be limited by the maxi-
mum number of TEPRI cards that can be installed in the OfficeServ 7100.
When engineering the network of systems, a discrete numbering plan must be used. The size and complexi-
ty of the numbering plan as well as the number of stations and trunks may limit the actual number of nodes
available to the network.
•
Auto Answer Across Network: This setting will allow station to station calls across the network to follow
the auto answer setting of the called keyset.
•
Call Completion, Busy Station (CCBS) also known as Callback or Busy Station Callback. When a station in
one system calls a station in another system across the network link and the destination station is busy
the calling station can set a Callback to the busy station.When the busy station becomes idle the system
will notify the callback originating station by ringing that station and when the originating station
answers, the system will call the destination station. Not available on QSIG over PRI.
•
Call Completion, No Response (CCNR) also known as Callback or No Answer Callback. When a station in
one system calls a station in another system across the network link and the destination station does not
answer the calling station can set a Callback to the called station. When that station indicates the user is
present by becoming busy then idle the system will notify the callback originating station by ringing that
station and when the originating station answers, the system will call the destination station.
4.19
Table of Contents
Home Page
Hide quick links:
Advertisement
Table of Contents
