Quick Start: Getting Up To Speed - Traxxas E-Maxx 3906 Owner's Manual

Quick Start: Getting up to Speed

The Quick Start
Guide is not
intended to
Refer to the pages indicated for details on each step. Look for the
replace the full operating
Quick Start logo on the bottom corners of Quick Start pages.
instructions available in
this manual. Please read
1.
this entire manual for
complete instructions
on the proper use and
maintenance of
2.
your E-Maxx.
3.
4.
5.
6.
7.
8.
9.
8
The following guide is an overview of the
procedures for getting your E-Maxx running.
Charge the battery packs • See sidebar, page 14
The E-Maxx requires two fully charged 7.2-volt
battery packs (not included).
Glue the tires • See page 9
Glue the tires to the rims to prevent the rims
from spinning inside the tires.
Install the antenna • See page 15
Install the antenna mast in the E-Maxx.
Install batteries in the transmitter • See page 13
The TQ-3 transmitter requires 8 AA alkaline batteries.
Install battery packs in the model • See page 14
Turn on the radio system • See page 18
Make a habit of turning the transmitter on first, and off last.
Check servo operation • See page 19
Make sure the throttle, steering, and shifting servos are
working correctly.
Range test the radio system • See page 20
Follow this procedure to make sure your radio system
works properly at a distance and that there is no
interference from outside sources.
Decal and Install the body • See page 10
10. Drive your E-Maxx • See page 21
Driving tips and adjustments for your E-Maxx
11. Maintaining your E-Maxx • See page 28
Follow these critical steps to maintain the performance
of your E-Maxx and keep it in excellent running
condition.