Decorating Your E-Maxx; Applying The Decals - Traxxas E-Maxx 3906 Owner's Manual

Decorating Your E-Maxx

Applying The Decals

The ProGraphix painted
body is covered with a
protective film for shipping.
You must remove this film
before applying any decals.
To remove the film, lift a
corner of the film and
carefully pull it off the body
in one continuous piece.
Your E-Maxx decals are die-
cut for easy removal. Use a
hobby knife to lift the
corner of a decal and lift it
from the backing.
Carefully position the decal
over the desired location
and press one side on the
body. Pull the decal tight
and use a finger to gradually
smooth out any air bubbles
as you apply the decal.
Look at the photos on the box for typical decal placement.
10