Table of Contents
Advertisement
The Quick Start Guide is
not intended to replace the
full operating instructions
available in this manual.
Please read this entire
manual for complete
instructions on the proper
use and maintenance of
your model.
Look for the Quick Start
logo at the bottom of
Quick Start pages.
8 • MAXX
QUICK START: GETTING UP TO SPEED
The following guide is an overview of the procedures for getting your model running. Look for the Quick Start logo on the bottom
corners of Quick Start pages.
1. Read the safety precautions on pages 4-5
For your own safety, understand where carelessness and misuse
could lead to personal injury.
2. Charge the battery pack • See page 12
Your model requires a LiPo battery pack and a compatible battery
charger (sold separately). Never use a NiMH or NiCad charger to
charge LiPo battery packs.
3. Install batteries in the transmitter • See page 12
The transmitter requires 4 AA alkaline batteries (sold separately).
4. Install battery packs in the model • See pages 13
Your model requires a fully charged battery pack
(not included).
5. Turn on the radio system • See page 13
Make a habit of turning the transmitter on first, and off last.
6. Check servo operation • See page 14
Make sure the steering servos are working correctly.
7. Range test the radio system • See page 15
Follow this procedure to make sure your radio system works properly at
a distance and that there is no interference from outside sources.
8. Detail your model • See page 9
Apply other decals if desired.
9.
Drive your model • See page 20
Driving tips and adjustments for your model.
10. Maintaining your model • See page 26
Follow these critical steps to maintain the performance
of your model and keep it in excellent running condition.
Advertisement
Table of Contents
