Symbols For The Main Power Switch - Ricoh SP 1200S Quick Setup Manual

Sp 1200s
Hide thumbs Also See for SP 1200S:
Table of Contents

Advertisement

To prevent injuries, DO NOT put your fingers in the
area shown in the illustrations.
DO NOT use a vacuum cleaner to clean up scattered toner. Doing this might cause the toner
dust to ignite inside the vacuum cleaner, potentially starting a fire. Please carefully clean the
toner dust with a dry, lint-free cloth and dispose of it according to local regulations.
If moving your machine, use the handholds provided. First making sure to disconnect any
cables.
Plastic bags are used in the packaging of your machine. To avoid danger of suffocation, keep
these bags away from babies and children.
Note
The fuser unit is marked with a caution label. DO NOT
remove or damage the label.
Caution
Be sure to disconnect the plug from the wall outlet and clean the prongs and the area around the prongs at
least once a year. Allowing dust to build up on the plug constitutes a fire hazard.

Symbols for the main power switch

In accordance with IEC 60417, this machine uses the following symbols for the main power switch:
-
means POWER ON.
-
means POWER OFF.
Note
When you move the machine, grasp the side handholds that are under the scanner. Do NOT carry the machine
by holding it at the bottom.
Safety Precautions
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents