Ricoh Scanner Scanner Manual page 67

Specifying the path by browsing to the destination on a NetWare server
Specify the path by browsing to the destination folder in an NDS tree or on a
NetWare Bindery server.
A
Press [Manual Entry].
B
Press [NCP].
C
Select the connection type.
Press [NDS] to specify a folder in the NDS tree.
Press [Bindery] to specify a folder on the NetWare Bindery server.
D
Press [Browse Network] under the path name field.
If you selected [NDS] under [Connection Type], the NDS tree list appears.
If you selected [Bindery] under [Connection Type], the NetWare Bindery server
list appears.
E
Search for the destination folder in the NDS tree or NetWare Bindery serv-
er.
If you cannot find the destination folder, press [Up One Level], and then search
for the folder at that level.
F
Select the destination folder.
G
Press [OK] twice.
Note
❒ If you change the protocol after entering the path name, user name, or
password, a confirmation message appears.
❒ Only folders that you have the read privileges for are displayed.
❒ If the language used for the NDS tree or by the NetWare Bindery server
differs from that used by the machine, file names in the NDS tree or on the
NetWare Bindery server might appear garbled.
❒ Up to 100 items can be displayed.
Specifying Scan to Folder Destinations
2
59