Ricoh Scanner Scanner Manual page 129

Original orientation
Bottom edge of original is placed first
ATF017S
Align the original, turn it rightward or left-
ward, and then place it face down.
Note
❒ You can make the original orientation setting only when the scan size is
specified.
❒ Originals are normally rectangular ( ) or horizontally long ( ). However,
the table above uses squares to make original orientation easier to under-
stand. Even if the actual shape of the original is different, the combination
of original orientation and the orientation specified on the control panel
does not change.
Setting Original Orientation
Control panel key
6
121