Networking The Pdu - Tripp Lite PDUMH15AT Owner's Manual

Switched/metered rack pdu with automatic transfer switch
Hide thumbs Also See for PDUMH15AT:
Table of Contents

Advertisement

2. Installation
2.2 Connecting the PDU
2-4
Connect PDU Input Plugs: (See the
Configuration and Operation section for more
information.) Connect the Primary input plug
to a preferred source of grounded 120V AC
power, such as a SmartOnline
UPS system must not share a circuit with a heavy
electrical load (such as an air conditioner or
refrigerator). Under normal operating conditions,
the PDU will distribute AC power from the
Primary input source. Connect the Secondary
input plug
to an alternative source of grounded
B
120V AC power, such as a redundant
SmartOnline UPS System. The UPS system must
not share a circuit with a heavy electrical load
(such as an air conditioner or refrigerator). Do not
plug the Secondary input into the same power
source as the Primary input. The PDU will
distribute AC power from the Secondary input
only if the Primary input becomes unavailable.
Note: Immediately after the PDU is connected to live AC
power, you may notice a series of soft clicking sounds emitted by
electrical relays within the PDU. The relays may also click
occasionally during the operation of the PDU. This is normal.
3
Connect Equipment to PDU: Do not exceed
the load rating of the PDU. The total electrical
current used by the PDU will be displayed on the
digital meter in amperes. Each outlet includes a
green LED that illuminates when the outlet is
receiving AC power.
3

2.3 Networking the PDU

Note: The MAC address of the PDU (a 12-digit string in this format: 000667xxxxxx) is printed on a label attached to the PDU enclosure.
The MAC address is also printed on a label attached to the internal network card.
If your network's DHCP server will assign a dynamic IP address to the PDU automatically, go to Step
. If you will assign a static IP address to the PDU manually, go to Step
4-1
method to use, contact your network administrator for assistance before continuing the installation
process.
200905008 93-2857.indb 4
( continued )
( continued )
A
UPS System. The
PDUMH15AT
PDUMH20AT
(Only Applicable to Models with SNMP Network Card Installed)
4
A
B
B
2-4
3
. If you are uncertain which
5-1
PDUMH15AT,
PDUMH15ATNET
A
PDUMH20AT,
PDUMH20ATNET
PDUMH15ATNET
PDUMH20ATNET
5/5/2009 9:36:42 AM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pdumh20atPdumh15atnetPdumh20atnet

Table of Contents