Installing The Fireplace - Montigo R520 Installation & Maintenance Manual

R520 & R620 Power Vent Indoor Gas Fireplace

Installing the Fireplace:

Place the Fireplace on the platform and install the Vent pipe, and Power Vent module. Next, connect the Gas line, and provide a gas service
shut-off valve; according to local gas codes. Before fastening in place Line up the front face of the fireplace (top and bottom), Figure 3. then
secure in place with 1/4"bolts and washers to the platform.
2" Clearance
Figure 4. Fireplace installation, (Inlet Gas & Power Vent).
Page 10
Installation
Intake / Exhaust
Vent Pipe (5"/10")
1/2"
2" Clearance
Supply Gas
connection
XG0771 - 040513.3