Clearance Requirments, Operating Instructions And Settings - Nieco ExVection 6220 Owner's Manual

CLEARANCE REQUIREMENTS
This equipment must be installed in accordance with the following clearances in order to provide proper operation and servicing of the
appliance. Also, it is recommended that the equipment be installed with sufficient clearances to provide proper cleaning and mainte-
nance.
LEFT SIDE 1"
OPERATING INSTRUCTIONS
Turn the toaster on by pressing the power button. The control, blower and elements will turn on and the conveyor belt will
start moving.
Push the product selection button for the item you want to toast. The control will set the speed and heat level.
When you are done with the toaster push the power button to turn it off. The blower will continue continue to run for approxi-
mately 18 minutes to cool the toaster down.
DISPLAY (TIME)
PRODUCT SELECTION BUTTONS
LED LIGHTS FOR SELECTED PRODUCT
UP/DOWN BUTTONS
MAIN POWER SWITCH
SETTINGS
All toasters should be programmed with the following settings:
BUTTON 1: Speed 15, Power 20 (100%)
BUTTON 3: Speed 10, Power 20 (100%)
BUTTON 4: Speed 15, Power 20 (100%)
BUTTON 5: Speed 22, Power 15 (75%)
BUTTON 6: Speed 26, Power 15 (75%)
BACK SIDE PANEL 2"
FRONT 12"
6
Nieco Corporation - ExVection Toaster 6220
RIGHT SIDE 1"
DO NOT UNPLUG
THE TOASTER
WHILE THE
BLOWER IS ON,
EXCEPT IN
EMERGENCY