Response Type To Ll Polling Calls (Ll Reply); Automatic Channel Switching (Auto Switch) - Simrad HH36 User Manual

4-8-5 Response type to LL polling calls (LL REPLY)

You can set up the radio to respond to an LL polling request in one of three ways:
• MANUAL reply manually to any incoming LL polling requests from your buddies
• AUTO automatically replies to any incoming LL polling requests from any of your
buddies
• OFF ignores all incoming buddy LL polling requests.
DSC SETUP
INDIV REPL▲
DSC SELECT
►LL REPLY ▼
1. Select DSC SETUP then LL REPLY.
2. Select your response and press ENTER to confirm and return to the menu.

4-8-6 Automatic Channel switching (AUTO SWITCH)

When a DSC call is received, it may include a request to change to a specific channel for
subsequent communications. If a channel switch request is included, your options are:
• allow the radio to switch to the requested channel immediately by pressing the ENTER
button, or
• do nothing to allow the radio to automatically switch to the requested channel after
a delay of 10 seconds, or
• cancel the automatic switch and remain on the current channel by pressing the EXIT
button.
However, automatic switching to a subsequent communications channel on receipt of a
DSC call might in some cases disrupt important ongoing communications if the working
channel changes without the operator knowing.
You can prevent the radio from automatically switching from the current working chan-
nel by setting the AUTO SWITCH feature to OFF.
If the AUTO SWITCH feature is set to OFF, an
you that this feature is set to off. Additionally, the text "AUTO SW OFF" will be included in
an All Ships or Group call replacing the text "AUTO CHxx"
DSC SETUP
DSC SELECT▲
LL REPLY
►AUTO SWITC▼
42
LL REPLY
►MANUAL
AUTO
OFF
AUTO SWITCH
►ON
OFF
Simrad - HH36 Installation and Operation Instructions
X
will be displayed on the LCD to remind