Delete A Waypoint; Set A Route To A Stored Waypoint - Simrad HH36 User Manual

When you reach the last character of the waypoint name, make any changes if necessary,
then press ENTER to move the cursor to the waypoint icon.
Note: If you do not want to change the waypoint name waypoint icon, press ENTER
repeatedly until the cursor moves to the latitude.
To change the waypoint icon, use the CH / to change the icon or press ENTER to skip
to latitude. To change latitude, use the CH / to change the first digit or press ENTER to
skip to the next digit. Repeat if necessary. When you reach the last digit, push ENTER to
move the cursor to longitude.
Note: If you do not want to change the latitude, press ENTER repeatedly until the cursor
moves to the longitude.
1. Repeat the previous step to change or press ENTER to continue.
2. A new screen appears. Press ENTER if you want to STORE the new waypoint. If you
want to keep the original entry, move the cursor to NO then press ENTER.

4-1-3 Delete a waypoint

MENU SELECT
►WAYPOINT
BACKLIGHT
▼
LAMP
DELETE
FISH 2
►YES
NO
1. Select WAYPOINT and press ENTER.
2. Select WP LIST and press ENTER. The cursor is at NEW WP, scroll down to the
waypoint you want to delete, then press ENTER.
3. The cursor is at GO. Move the cursor to delete and push ENTER.
4. The waypoint is deleted immediately and the revised waypoint list is displayed.

4-1-4 Set a route to a stored waypoint

MENU SELECT
►WAYPOINT
BACKLIGHT
▼
LAMP
24
WAYPOINT
►WP LIST
NEAREST WP
TEMP
WP LIST
NEW WP
FISH 1
►HOME
WAYPOINT
►WP LIST
NEAREST WP
TEMP
Simrad - HH36 Installation and Operation Instructions
WP LIST
NEW WP
FISH 1
►FISH 2
WP LIST
NEW WP
FISH 1
►HOME
FISH 2
GO
WP EDIT
►DELETE
HOME
►GO
WP EDIT
DELETE