Showline SL NITRO 510C Installation And User Manual
  1. Manuals
  2. Brands
  3. Showline Manuals
  4. Lighting Equipment
  5. SL NITRO 510C
  6. Installation and user manual

Showline SL NITRO 510C Installation And User Manual

Rgb & w led strobe luminare
Hide thumbs
Table of Contents

Advertisement

Quick Links

SL NITRO 510C RGB & W LED Strobe Luminaire

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SL NITRO 510C and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Showline SL NITRO 510C

Summary of Contents for Showline SL NITRO 510C

  • Page 1 SL NITRO 510C RGB & W LED Strobe Luminaire...

  • Page 2: Showline Offices

    Information contained in this document may not be duplicated in full or in part by any person without prior written approval of Showline. Its sole purpose is to provide the user with conceptual information on the equipment mentioned. The use of this document for all other purposes is specifically prohibited.

  • Page 3: Important Information

    Showline Limited Two-Year Warranty Showline offers a two-year limited warranty of its luminaires against defects in materials or workmanship from the date of delivery. A copy of Showline two-year limited warranty containing specific terms and conditions can be obtained by contacting your local Showline office.

  • Page 4: Table Of Contents

    About this Manual ..................................4 Included Items..................................... 4 Accessories ....................................4 SL NITRO 510C LED STROBE Luminaire Power Input Cables (North American Models Only)........4 SL NITRO 510C LED STROBE Luminaire Accessories ....................4 SL NITRO 510C LED STROBE LUMINAIRE OVERVIEW SL NITRO 510C LED STROBE Luminaire Components......................
  • Page 5 SL NITRO 510C LED Groups/Zones ............................45 Strobe Rate DMX Timing Detail .............................. 46 Strobe Duration DMX Timing Detail ............................47 SL NITRO 510C LED STROBE Luminaire RDM Parameter IDs ..................48 CLEANING AND CARE Special Cleaning and Care Instructions ............................ 52 Front Lens Cleaning..................................

  • Page 6: Preface

    SL NITRO 510C LED STROBE Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon PC1GR with Edison Connector SL NITRO 510C LED STROBE Luminaire AC Power Input Cable (9.8 Feet / 3 meter), Powercon with PC3BE Bare End* (*Note, user supplies and installs own AC input connector)

  • Page 7: Sl Nitro 510C Led Strobe Luminaire Overview

    DMX512 / RDM Output RDM Input LCD Display / Menu System* (*refer to "LCD Display / Menu System" on page 6 additional information) Figure 2: SL NITRO 510C LED STROBE Luminaire Components Sh wline SL NITRO 510C LED STROBE Luminaire Components...

  • Page 8: Lcd Display / Menu System

    (with rotation of menu) Figure 3: LCD Display & Menu System Note: For Menu operation and programming details, refer to "LCD Display and Menu System" on page Sh wline SL NITRO 510C LED STROBE LUMINAIRE OVERVIEW...

  • Page 9: Installation And Set Up

    INSTALLATION AND SET UP 1. Power Requirements The SL NITRO 510C LED STROBE Luminaire operates on AC input voltages from 100 to 240 VAC. WARNING! This unit does not contain an ON/OFF switch. Always disconnect power input cable to completely remove power from unit when not in use.

  • Page 10: Connecting Power

    Table 2 on page 8 describes how to connect power to your SL NITRO 510C LED STROBE Luminaire. Field wiring of the SL NITRO 510C LED STROBE Luminaire is straight forward. A total of 3 wires/conductors is supplied from the unit.

  • Page 11: Connecting To The Dmx512 Network

    DMX connector on the first SL NITRO 510C LED STROBE Luminaire. Another cable runs from the other DMX connector on the first unit to a DMX connector on the next SL NITRO 510C LED STROBE Luminaire (or DMX512 device to be controlled).

  • Page 12: Connecting & Mounting Multiple Luminaires

    5. Connecting & Mounting Multiple Luminaires SL NITRO 510C LED STROBE Luminaires include a built-in Quick Connect system that allows the luminaires to be physically connected together while retaining perfect pixel pitch. Units may be connected in top-to-bottom or side- by-side to allow for a wide range of configurations.

  • Page 13: Connecting Luminaires Top-To-Bottom

    WARNING! Your structure must be capable of properly supporting the weight of multiple connected fixtures. Each fixture must use an approved safety cable attached to a fixed object. Up to twenty SL NITRO 510C LED STROBE Luminaires may be supported when connected using the Quick Connect system. When connecting units together, ensure all Quick-Connect pins are in the "engaged"...

  • Page 14: Connecting Luminaires Side-To-Side

    6. Mounting SL NITRO 510C LED STROBE Luminaire with Other Luminaires The SL NITRO 510C LED STROBE Luminaire and SL BAR 520 LED Luminaire are designed to be connected together top-to-bottom and/or end-to-end using the same connecting hardware. The pixels of the SL BAR 520 LED Luminaire and the zones of the SL NITRO 510C LED STROBE Luminaire will be perfectly aligned when connected via the built-in connecting hardware.

  • Page 15: Connecting Combined Luminaires Top-To-Bottom

    SL BAR 520, preventing the units from spreading apart in the center. • If the bottom of a configuration has two SL NITRO 510C LED STROBE Luminaires below a single SL BAR 520,...
  • Page 16 SL NITRO 510C LED STROBE Luminaire Installation & User’s Manual vent the spacing between the two SL NITRO 510C LED STROBE Luminaires from spreading apart at the center. Obtain and install: SL BAR 520 LED Luminaire See detail below SL NITRO 510C LED...

  • Page 17: Connecting Combined Luminaires Side-To-Side

    "Connecting Luminaires Side-to-Side" on page 12). • Each SL NITRO 510C LED STROBE Luminaire and SL BAR 520 RGBW Luminaire ships with three Luminaire Connecting Pins as indicated in Figure 9. • The three side-to-side pins must be installed per luminaire.

  • Page 18: Operation And Programming

    Installation & User’s Manual OPERATION AND PROGRAMMING 1. LCD Display and Menu System The SL NITRO 510C LED STROBE Luminaire’s LCD Display and Menu System provides local control for accessing the following fixture’s settings: • Presets (Standard and User Defined) •...

  • Page 19: Sl Nitro 510C Led Strobe Luminaire Main Menu Options

    Figure 13: LCD Display and Menu System 3. SL NITRO 510C LED STROBE Luminaire Main Menu Options Presets Presets are stored values of the luminaire's LED settings that can be recalled via the menu system or DMX. You can customize up to 31 presets via the menu system.

  • Page 20: Effects

    Step 6. The user chase is now saved and can be recalled via the menu or DMX. Settings/Security All Showline fixtures have a multiple level locking feature. This allows you to configure the fixture and allow different menu access to multiple users. The menu system can be locked instantly or assigned to power on to a particular lock level.

  • Page 21: Settings/General

    Preset & Chase - user edited Presets and Chases are not able to be restored to fac- tory defaults. • No - no action. Load Factory • Yes - restore to factory default menu settings. Settings/DMX DMX configuration options are available in the DMX menu. Sh wline SL NITRO 510C LED STROBE Luminaire Main Menu Options...

  • Page 22: Settings/Display

    SL NITRO 510C LED STROBE Luminaire Installation & User’s Manual Use the Up and Down buttons to select parameters and the Left and Right buttons to assign the fixture's DMX settings. When finished, press the Check button to exit the menu level. The adjustable parameters are described in Table 8.

  • Page 23: Quick Selection Buttons

    Installation & User’s Manual Quick Selection Buttons The Showline menu system includes four quick selection buttons on the top of the menu. These keys provide direct access to common functions and act as shortcuts to main menu items as described in Table 9.

  • Page 24: Dimming Curve Selection

    PL_Curve * DMX Value DMX Value *PL Curve follows the dimming curve of Philips Selecon PL series LED luminaries. S_Curve Square Curve DMX Value DMX Value Figure 14: SL NITRO 510C LED STROBE Luminaire Dimmer Curves Sh wline OPERATION AND PROGRAMMING...

  • Page 25: Master / Slave Operational Mode

    6. Master / Slave Operational Mode The Master / Slave Operational Mode allows one SL NITRO 510C LED STROBE Luminaire to act as the "Master" unit and all other connected units are controlled by this unit. When a unit is set to "Slave" mode, it will only listen to and follow any commands sent from a "Master"...

  • Page 26: Dmx Control

    1. RGB & W Operation The SL NITRO 510C LED STROBE Luminaire operates either as an RGB or White strobe, with the two engines operating separately from each other. It is not possible to utilize both RGB and White values to create a combined output of the two systems.
  • Page 27 SL NITRO 510C LED STROBE Luminaire Installation & User’s Manual Table 11: DMX Channel Mapping (RGBW Full Mode) CONTINUED FROM PREVIOUS PAGE Preset 7 DMX 19 - 20 Preset 8 DMX 21 - 22 Preset 9 DMX 23 - 24...
  • Page 28 SL NITRO 510C LED STROBE Luminaire Installation & User’s Manual Table 11: DMX Channel Mapping (RGBW Full Mode) CONTINUED FROM PREVIOUS PAGE Chase1 DMX 202 - 204 Chase2 DMX 205 - 207 Chase3 DMX 208 - 210 Chase4 DMX 211 - 213...
  • Page 29 SL NITRO 510C LED STROBE Luminaire Installation & User’s Manual Table 11: DMX Channel Mapping (RGBW Full Mode) 8-bit control for the intensity of the Zones - 0 to Zone 1 - 6 Intensity 0 - 255 0 - 100%...

  • Page 30: Rgbw Full Mode (Zones)

    Installation & User’s Manual 4. RGBW Full Mode (Zones) Table 12 provides DMX channel mapping of all DMX512 control values when the SL NITRO 510C LED STROBE Luminaire is operated in various Groups (Zones) Control Mode when set to RGBW Full Mode.

  • Page 31: Rgbw Expanded Mode

    Installation & User’s Manual 5. RGBW Expanded Mode Table 13 provides DMX channel mapping of the DMX512 control values when the SL NITRO 510C LED STROBE Luminaire is in RGBW Expanded DMX512 mode (as set by the luminaire’s menu system).
  • Page 32 SL NITRO 510C LED STROBE Luminaire Installation & User’s Manual Table 13: DMX Channel Mapping (RGBW Expanded Mode) CONTINUED FROM PREVIOUS PAGE CF_27_Lighter Blue DMX 123 - 124 CF_28_Cyan DMX 125 - 126 CF_29_Marine Blue DMX 127 - 128 CF_30_Soft Green DMX 129 - 130...
  • Page 33 SL NITRO 510C LED STROBE Luminaire Installation & User’s Manual Table 13: DMX Channel Mapping (RGBW Expanded Mode) Control channel operation. Set control channel value to desired action, hold value for at least 5 seconds, then turn to 0. Set control channel value to 0 without any scaling.

  • Page 34: Rgbw Expanded Mode (Zones)

    Installation & User’s Manual 6. RGBW Expanded Mode (Zones) Table 14 provides DMX channel mapping of all DMX512 control values when the SL NITRO 510C LED STROBE Luminaire is operated in various Groups (Zones) Control Mode when set to RGBW Expanded Mode.

  • Page 35: Rgbw 16-Bit Mode

    Installation & User’s Manual 7. RGBW 16-Bit Mode Table 15 provides DMX channel mapping of the DMX512 control values when the SL NITRO 510C LED STROBE Luminaire is in RGBW 16-Bit DMX512 mode (as set by the luminaire’s menu system).
  • Page 36 SL NITRO 510C LED STROBE Luminaire Installation & User’s Manual Table 15: DMX Channel Mapping (RGBW 16-Bit Mode) CONTINUED FROM PREVIOUS PAGE CF_27_Lighter Blue DMX 123 - 124 CF_28_Cyan DMX 125 - 126 CF_29_Marine Blue DMX 127 - 128 CF_30_Soft Green DMX 129 - 130...
  • Page 37 SL NITRO 510C LED STROBE Luminaire Installation & User’s Manual Table 15: DMX Channel Mapping (RGBW 16-Bit Mode) Control channel operation. Set control channel value to desired action, hold value for at least 5 seconds, then turn to 0. Set control channel value to 0 without any scaling.

  • Page 38: Rgbw 16-Bit Mode (Zones)

    Installation & User’s Manual 8. RGBW 16-Bit Mode (Zones) Table 16 provides DMX channel mapping of all DMX512 control values when the SL NITRO 510C LED STROBE Luminaire is operated in various Groups (Zones) Control Mode when set to RGBW 16-Bit Mode.

  • Page 39: Rgbw 8-Bit Mode

    Installation & User’s Manual 9. RGBW 8-Bit Mode Table 15 provides DMX channel mapping of the DMX512 control values when the SL NITRO 510C LED STROBE Luminaire is in RGBW 8-Bit DMX512 mode (as set by the luminaire’s menu system).
  • Page 40 SL NITRO 510C LED STROBE Luminaire Installation & User’s Manual Table 17: DMX Channel Mapping (RGBW 8-Bit Mode) CONTINUED FROM PREVIOUS PAGE CF_27_Lighter Blue DMX 123 - 124 CF_28_Cyan DMX 125 - 126 CF_29_Marine Blue DMX 127 - 128 CF_30_Soft Green DMX 129 - 130...
  • Page 41 SL NITRO 510C LED STROBE Luminaire Installation & User’s Manual Table 17: DMX Channel Mapping (RGBW 8-Bit Mode) Control channel operation. Set control channel value to desired action, hold value for at least 5 seconds, then turn to 0. Set control channel value to 0 without any scaling.

  • Page 42: Rgbw 8-Bit Mode (Zones)

    Installation & User’s Manual 10. RGBW 8-Bit Mode (Zones) Table 18 provides DMX channel mapping of all DMX512 control values when the SL NITRO 510C LED STROBE Luminaire is operated in various Groups (Zones) Control Mode when set to RGBW 8-Bit Mode.

  • Page 43: 6-Channel Mode

    Installation & User’s Manual 11. 6-Channel Mode Table 19 provides DMX channel mapping of the DMX512 control values when the SL NITRO 510C LED STROBE Luminaire is in 6-Channel DMX512 mode (as set by the luminaire’s menu system). Table 19: DMX Channel Mapping (6-Channel Mode)
  • Page 44 SL NITRO 510C LED STROBE Luminaire Installation & User’s Manual Table 19: DMX Channel Mapping (6-Channel Mode) CONTINUED FROM PREVIOUS PAGE CF_27_Lighter Blue DMX 123 - 124 CF_28_Cyan DMX 125 - 126 CF_29_Marine Blue DMX 127 - 128 CF_30_Soft Green DMX 129 - 130...
  • Page 45 SL NITRO 510C LED STROBE Luminaire Installation & User’s Manual Table 19: DMX Channel Mapping (6-Channel Mode) Control channel operation. Set control channel value to desired action, hold value for at least 5 seconds, then turn to 0. Set control channel value to 0 without any scaling.

  • Page 46: Mapping 16-Bit Mode

    Installation & User’s Manual 12. Mapping 16-Bit Mode Table 20 provides DMX channel mapping of the DMX512 control values when the SL NITRO 510C LED STROBE Luminaire is in Mapping 16-Bit DMX512 mode (as set by the luminaire’s menu system).

  • Page 47: Sl Nitro 510C Led Groups/Zones

    Table 12 on page 28, Table 14 on page 32, Table 16 on page 36, and Table 18 on page 40 provides DMX channel mapping of all DMX512 control values when the SL NITRO 510C LED STROBE Luminaire is set to multiple LED groups/zones (as set by the luminaire’s menu system).

  • Page 48: Strobe Rate Dmx Timing Detail

    14. Strobe Rate DMX Timing Detail The chart below describes the Strobe Rate DMX parameters of the SL NITRO 510C LED STROBE Luminaire. Note: Continuous ON Mode illuminates all LEDs without strobing. This feature is activated when Strobe Rate and Strobe Duration are both set to DMX value 255.

  • Page 49: Strobe Duration Dmx Timing Detail

    SL NITRO 510C LED STROBE Luminaire Installation & User’s Manual 15. Strobe Duration DMX Timing Detail The chart below describes the Strobe Duration DMX parameters of the SL NITRO 510C LED STROBE Luminaire. DMX Value Percent (%) DMX Value Percent (%)

  • Page 50: Sl Nitro 510C Led Strobe Luminaire Rdm Parameter Ids

    Installation & User’s Manual 16. SL NITRO 510C LED STROBE Luminaire RDM Parameter IDs The following tables outline and describe all the RDM parameters IDs associated with SL NITRO 510C LED STROBE Luminaires. • Table 21, “SL NITRO 510C LED STROBE Luminaire RDM Product Parameters IDs”...
  • Page 51 SL NITRO 510C LED STROBE Luminaire Installation & User’s Manual Table 23: SL NITRO 510C LED STROBE Luminaire RDM Parameters IDs RDM Parameter IDs Value Comment Implemented Allowed Allowed ■ ■ DEVICE_INFO 0x0060 ■ PRODUCT_DETAIL_ID_LIST 0x0070 ■ ■ DEVICE_MODEL_DESCRIPTION 0x0080 ■...
  • Page 52 2010. Status ID Message Value Data Value 1 Data Value 2 Status ID Description 8100H ALL OK Table 25: SL NITRO 510C LED STROBE Luminaire RDM Manufacturer Specific PIDs for Root Device Type Length Unit Prefix Default Description Allowed Allowed Parameter IDs Manufacturer Defined PIDs range is 0x8000-0xffdf.
  • Page 53 SL NITRO 510C LED STROBE Luminaire Installation & User’s Manual Table 26: SL NITRO 510C LED STROBE Luminaire RDM Manufacturer Specific PIDs for Sub Device Type Length Unit Prefix Default Description Allowed Allowed Parameter IDs Manufacturer Defined PIDs range is 0x8000-0xffdf. See Table A-3, ANSI E1.20-2010 ■...

  • Page 54: Cleaning And Care

    Additional care needs to be taken with the plastic components because they are much easier to scratch or damage than glass. The following is a list of cleaning materials required to care for your SL NITRO 510C LED STROBE Luminaire: • Lint free lens tissue •...

  • Page 55: Technical Specifications

    SL NITRO 510C LED STROBE Luminaire Installation & User’s Manual TECHNICAL SPECIFICATIONS 1. SL NITRO 510C LED STROBE Luminaire Operational Specifications Source: High Intensity RGB & W LED Array (x264 Red, Green, Blue / x 264 White) Beam Angle: 120 Degrees Light Output: >...

Table of Contents