Repeat And Proggrammed Play; Repeat Play; Programmed Play; Playing Other Audio Devices Through Your Set - LENCO SCD-37 USB User Manual

06

7.REPEAT AND PROGGRAMMED PLAY

7.1 Repeat play

(1) Press the REPEAT button once to play the current song over and over.
(2) Press the REPEAT button twice times to repeat playing all the songs in order.

7.2 Programmed play

In STOP mode,you can make a program of up to 20 tracks in the order you want them to
be played.
(1) Slide the FUNCTION switch to CD/USB/AUX IN position,Make sure the CD is stopped.
(2) Press the PROGRAM button. The program number " Pro o1" .
(3) Press the PREV/NEXT button to select the desired track,and press the PROGRAM
button to confirm.
(4) REPEAT step 3 to program other tracks till you finish ( up to 20 tracks)
(5) Press the PLAY/PAUSE button to start programmed play.
To play all the programmed tracks repeatedly
Press the REPEAT button in program play mode.
To change the current program
Just create a new program following the programming procedure.
To cancel programmed play
Press the STOP button twice or slide the FUNCTION switch to OFF position.

8.PLAYING OTHER AUDIO DEVICES THROUGH YOUR SET

You can enjoy the music of a digital MP3 player,computer or any other external audio
device(with a 3.5mm stereo jack)through the set.
(1) Insert an audio cable(not included) with 3.5mm plugs on each end into the
HEADPHONES jack or LINE OUT jack of your MP3 player or computer,and the other end
into the AUX IN jack of the set.
(2) Connect the supplied AC power cord or batteries.
(3) Slide the FUNCTION switch to CD/USB/AUX IN position.
(4) Turn on your MP3 player or computer,adjust the VOLUME control of the MP3
player/computer and the player to the desired level.
(5) Slide the FUNCTION switch to OFF position after use.
NOTE:
When connecting an audio player to the set while the set is playing CD,the set will exit CD
mode and switch to AUX IN mode automatically.

9.LISTENING TO THE RADIO

(1) Connect the supplied AC power cord or batteries.
(2) Slide the FUNCTION switch to RADIO position,the POWER lamp will turn on.
(3) Slide the FM MONO/STEREO switch to the proper position that you want.
(4) Tune into the station you prefer using the TUNING control.Adjust for the clearest
sound.